Tarek,

 As a rule of thumb, you do not want the IP address on any interface on the
Port lines, you want it on a Bridge.  I'm doing the same thing you are, my
names are different and I'm using vxlan, but it's similar.

You want no ips on any interfaces from your example, except for br-int2 and
virtualswitch2, the actual bridges.

Also, those two bridges are two separate interfaces, so you want forwarding
(routing) enabled on the host.  As a test, you can move the ip address off
of the p16p1 interface and move it onto the br-int2 interface on both ends.




On Thu, Jun 12, 2014 at 8:36 AM, Tarek Watfa <[email protected]> wrote:

> Hello,
>
> I have to test OpenVswitch on lab to study openvswitch GRE
>
> I have 2 openvswitch server on 2 Fedora 18
>
> this is the configuration of the first one
>
> 52c4e81c-4d75-4118-81c0-e0d0055202ad
>
>     Bridge virtualSwitch
>
>         Port "tep01"
>
>             Interface "tep01"
>
>                 type: internal
>
>         Port "p16p1"
>
>             Interface "p16p1"
>
>         Port virtualSwitch
>
>             Interface virtualSwitch
>
>                 type: internal
>
>     Bridge "br-int1"
>
>         Port "br-int1"
>
>             Interface "br-int1"
>
>                 type: internal
>
>         Port "gre01"
>
>             Interface "gre01"
>
>                 type: gre
>
>                 options: {remote_ip="172.16.254.2"}
>
>     ovs_version: "1.11.0"
>
>
> the second one
>
>
>
> 90cb7b34-f474-477a-bc56-6361420e82ca
>
>     Bridge "virtualSwitch2"
>
>         Port "tep02"
>
>             Interface "tep02"
>
>                 type: internal
>
>         Port "p16p1"
>
>             Interface "p16p1"
>
>         Port "virtualSwitch2"
>
>             Interface "virtualSwitch2"
>
>                 type: internal
>
>     Bridge "br-int2"
>
>         Port "gre02"
>
>             Interface "gre02"
>
>                 type: gre
>
>                 options: {remote_ip="172.16.254.1"}
>
>         Port "br-int2"
>
>             Interface "br-int2"
>
>                 type: internal
>
>     ovs_version: "1.11.0"
>
>
>
> the link between the 2 OVS server is interface p16p1<--->p16p1
>
> the ip on p16p1 on the first ovs is 172.16.254.1 and second one
> 172.16.254.2
>
> on the interface p16p2 on first ovs serveri have a pc with 10.10.10.1 and
> on the second one 10.10.10.2
>
> i can't ping from 10.10.10.2 to 10.10.10.1
>
> and when i start ovs service on one of ovs the ping from 172.16.254.1 to
> 172.16.254.2 are down.
>
>
> can you help us?
>
> can we link a physical interface to a gre link bridge?
>
> regards.
>
> Tarek Watfa
>
> _______________________________________________
> discuss mailing list
> [email protected]
> http://openvswitch.org/mailman/listinfo/discuss
>
>


-- 
                      Fred Richards
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss

Reply via email to