Hi!
I have installed openvswitch-2.3.90 on Debian wheezy, and changed
/etc/network/interfaces:
auto lo eth1 br0
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
allow-ovs br0
iface br0 inet static
address 192.168.111.1
netmask 255.255.255.0
ovs_type OVSBridge
ovs_ports eth1
allow-br0 eth1
iface eth0 inet manual
ovs_bridge br0
ovs_type OVSPort
pre-up ifconfig $IFACE up
post-down ifconfig $IFACE down
after reboot I see br0 interface with proper IP address, but without eth1 port
added:
# ovs-vsctl show
3ec07e03-5a5a-44ec-8543-3a9bc380bfdb
Bridge "br0"
Port "br0"
Interface "br0"
type: internal
ovs_version: "2.3.90"
I think this is because openvswitch-switch isn't started before network
interface configuration stage, I see following errors on boot screen:
How can I fix this?
Pavel.
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss
