thank you, The problem I am facing, I have NetBSD host with four interfaces(wm0-wm3), running OpenvSwitch-2.3.0 added br0 bridge which is nothing but tap1, and added one of the interface/port wm1 to br0,my configuration is, tap1-192.168.2.1 host-1 (connected to wm1) - 192.168.2.10(gw 192.168.2.1) its working fine,I am able to ping from host to tap1 i.e gw but when try add one other interface/port say wm3 with host-2 -192.168.2.20 it fail to ping As I understand the interface with MAC address of same as tap1 can only ping to host not other, does it mean it work for only one port?
On Wed, Oct 29, 2014 at 6:02 AM, YAMAMOTO Takashi <[email protected]> wrote: > hi, > > > Hi, > > I am trying to run OVS-2.3 on NetBSD 6.1.4 i386 but getting following > > problem, > > thank you for trying the NetBSD port. > > > when I am trying to add bridge br0 using > > # ovs-vsctl add-br br0 > > ovs-vsctl: Error detected while setting up 'br0'. > > and if i see > > clover1# install/bin/ovs-vsctl > > show > > > > 86064ec5-56ac-4442-ab2e-609c2a4a95dd > > Bridge "br0" > > Port "br0" > > Interface "br0" > > type: internal > > but not able to br0 in ifconfig list > > > 2014-10-27T02:48:23Z|00006|netdev_bsd|INFO|tap tap1 is created for bridge > > br0 > > this is the local port of br0. > you can configure it with ifconfig. > > as Ben explained, NetBSD doesn't support interface renaming. > the kernel chose the names like "tap1", which might not be clear > for us human beings. you can examine log to find the right > interface. or probably it might be more convenient to compare > "ovs-ofctl dump-ports-desc br0" and "ifconfig -a" to look for > the interface with the mac address. > > YAMAMOTO Takashi >
_______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
