Hi,
I'm doing some testing with Open vSwitch 2.3.0 on Debian 7 (stable)
compiled from source and have encountered a fairly weird error. I don't
know if it is a problem with Debian or Open vSwitch.
The mgmt0 interface comes up fully configured after reboot but is not
accessible until I have "used" the network from the server, ie. by pinging
another host.
The very first ping will have a high ms of 1000+, indicating something is
going on in the background at this point.
My /etc/network/interfaces configuration:
auto lo0
iface lo inet loopback
allow-vmbr0 vbond0
iface vbond0 inet manual
ovs_bridge vmbr0
ovs_type OVSBond
ovs_bonds eth0 eth1
pre-up ( ifconfig eth0 mtu 9000 && ifconfig eth1 mtu 9000 )
post-up ( ifconfig vbond0 mtu 9000 )
ovs_options bond_mode=active-backup
allow-ovs vmbr0
iface vmbr0 inet manual
ovs_type OVSBridge
ovs_ports vbond0 mgmt0
mtu 9000
allow-vmbr0 mgmt0
iface mgmt0 inet static
ovs_bridge vmbr0
ovs_type OVSIntPort
address 10.69.52.6
netmask 255.255.255.0
gateway 10.69.52.1
dns-nameservers 10.69.8.254
mtu 1500
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss
