Does it make any difference if you set the datapath type as part of creating the bridge instead of afterward? Or if you restart vswitchd after setting the datapath type?
On Sun, Feb 22, 2015 at 09:40:22PM +0100, Andrei Manescu wrote: > Nope. That’s the whole thing AFTER I set the ‘netdev’ switch: > > > > > > > > > > > > > 2015-02-22T20:39:05.099Z|00018|ofproto_dpif|INFO|netdev@ovs-netdev: Datapath > supports recirculation > 2015-02-22T20:39:05.099Z|00019|ofproto_dpif|INFO|netdev@ovs-netdev: MPLS > label stack length probed as 3 > 2015-02-22T20:39:05.099Z|00020|bridge|INFO|bridge vmbr1: added interface > vmbr1 on port 65534 > 2015-02-22T20:39:05.099Z|00021|netdev_linux|WARN|vmbr1: obtaining netdev > stats via vport failed (No such device) > 2015-02-22T20:39:05.102Z|00022|bridge|INFO|bridge vmbr1: added interface eth1 > on port 1 > 2015-02-22T20:39:05.102Z|00023|netdev_linux|WARN|eth1: obtaining netdev stats > via vport failed (No such device) > 2015-02-22T20:39:05.102Z|00024|bridge|INFO|bridge vmbr1: using datapath ID > 0000000c29e93542 > 2015-02-22T20:39:05.102Z|00025|connmgr|INFO|vmbr1: added service controller > "punix:/var/run/openvswitch/vmbr1.mgmt" > 2015-02-22T20:39:08.079Z|00026|netdev_linux|WARN|vmbr1: obtaining netdev > stats via vport failed (No such device) > 2015-02-22T20:39:08.079Z|00027|netdev_linux|WARN|eth1: obtaining netdev stats > via vport failed (No such device) > > Anyway specific debugs I can enable ? > > > > > > > On 22 Feb 2015, at 21:35, Ben Pfaff <[email protected]> wrote: > > > > The log is probably longer than that, can you provide the whole thing? > _______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
