You built and installed the kernel module, but skipped the userspace utilities.
After ./configure ..., you need to 'make' and 'make install'. On 8 April 2015 at 03:29, Sanghamitra De <[email protected]> wrote: > Hi, > To install OVS-2.3.1 in Ubuntu 14.04 LTS 64 bit, I used the following > command sequence which went fine: > > sudo mkdir /work > cd /work > wget http://openvswitch.org/releases/openvswitch-2.3.1.tar.gz > tar zxf openvswitch-2.3.1.tar.gz > cd openvswitch-2.3.1 > ./configure --with-linux=/lib/modules/`uname -r`/build > sudo make modules_install > sudo /sbin/modprobe openvswitch > > /sbin/lsmod > cd / > sudo rm -rf /work > > After that i made a disc image to use it on other nodes. > > However, the following commands for configuring ovs throw error as per the > attached screenshot. > > > #ovsdb-tool create /usr/local/etc/openvswitch/conf.db > /users/peertest/openvswitch-2.3.1/vswitchd/vswitch.ovsschema > # ovsdb-server --remote=punix:/usr/local/var/run/openvswitch/db.sock \ > --remote=db:Open_vSwitch,Open_vSwitch,manager_options \ > --pidfile --detach > > What to do? > > > Do i move straight over to execute the following sequence of configuring OVS > without executing the above 2 commands which give error: > > ovs-vsctl --no-wait init > sudo ovs-vswitchd --pidfile --detach --log-file > sudo ovs-vsctl add-br OVSbr1sudo ovs-vsctl add-br OVSbr2sudo ifconfig eth2 > 0sudo ifconfig eth3 0sudo ovs-vsctl add-port OVSbr1 eth2sudo ovs-vsctl > add-port OVSbr2 eth3sudo ovs-vsctl show > > > Can anyone kindly give me the command sequence required??? Please help. > > PS: errors generated can be seen from the attached screenshot > > > Thanks & Regards > Sanghamitra > > _______________________________________________ > discuss mailing list > [email protected] > http://openvswitch.org/mailman/listinfo/discuss > _______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
