Hi, and again as before in that case you or anyone assisting needs the journal/syslog (wherever the eal messages are in your case). This is a follow on error, you need to find why it doesn't initialize properly.
Kind Regards, Christian Am 14.07.2016 14:28 schrieb "shyam yeduru" <yedurush...@hotmail.com>: > Hi > > We are able to complie OVS Master and DPDK 16.4. we are agian struck with > adding dpdk port to OVS Bridge. > > Followed this link : > https://github.com/openvswitch/ovs/blob/master/INSTALL.DPDK.md > > > Error logs attached here with. > > Thanks > Shyam Yeduru > > > From: bhanuprakash.bodire...@intel.com > > To: christian.ehrha...@canonical.com; yedurush...@hotmail.com > > CC: discuss@openvswitch.org > > Subject: RE: [ovs-discuss] OVS+DPDK issue on Ubuntu 16.04 > > Date: Thu, 14 Jul 2016 09:12:05 +0000 > > > > If you are using OVS Master with DPDK Master you can use the RFC patch: > http://openvswitch.org/pipermail/dev/2016-July/074448.html > > But as mentioned earlier, the preferred combination is OVS-Master + DPDK > 16.04. > > > > Regards, > > Bhanu Prakash. > > > > >-----Original Message----- > > >From: discuss [mailto:discuss-boun...@openvswitch.org] On Behalf Of > > >Christian Ehrhardt > > >Sent: Thursday, July 14, 2016 10:00 AM > > >To: shyam yeduru <yedurush...@hotmail.com> > > >Cc: discuss@openvswitch.org > > >Subject: Re: [ovs-discuss] OVS+DPDK issue on Ubuntu 16.04 > > > > > >Hi, > > >http://openvswitch.org/pipermail/dev/2016-April/069439.html > > > > > >What should work is: > > >OVS-2.5 + DPDK 2.2 > > >OVS-Master + DPDK 16.04 (soon 16.07 after dpdk release and patches into > > >OVS are accepted) > > > > > >Your issue seems like OVS-2.5 + DPDK 16.04 to me. > > >What combination did you use? > > > > > > > > > > > >Christian Ehrhardt > > >Software Engineer, Ubuntu Server > > >Canonical Ltd > > > > > >On Thu, Jul 14, 2016 at 8:43 AM, shyam yeduru <yedurush...@hotmail.com> > > >wrote: > > >Hi Christian and Aaron, > > > > > >Thanks for update. We have complied OVS and DPDK on Ubuntu 16.0.4. We > > >have encountered an error saying > > >" lib/netdev-dpdk.c: In function ‘netdev_dpdk_get_features’: > > >lib/netdev-dpdk.c:1569:29: error: ‘ETH_LINK_AUTONEG_DUPLEX’ undeclared > > >(first use in this function) > > > if (link.link_duplex == ETH_LINK_AUTONEG_DUPLEX) { " > > > > > >Follow link > > >: https://github.com/openvswitch/ovs/blob/master/INSTALL.DPDK.md > > > > > >Please find the attached error log here with. > > > > > >Thanks > > >Shyam Yeduru > > >________________________________________ > > >From: christian.ehrha...@canonical.com > > >Date: Tue, 12 Jul 2016 07:35:10 +0200 > > >Subject: Re: [ovs-discuss] OVS+DPDK issue on Ubuntu 16.04 > > >To: yedurush...@hotmail.com > > >CC: acon...@redhat.com; discuss@openvswitch.org > > > > > >Hi, > > >we haven't seen how you do it yet, so it is kind of hard to correct you. > > >The logs you sent were from the time you tried to add the dpdk ports, > but as I > > >said a few days earlier you likely have issues when initializing. > > > > > >Either - as Aaron said - missing the dpdk enabling commandline options, > or > > >having them but some other part of your setup letting it fail to > initialize. > > >The logs about that is what my link a few days ago referred to: > syslog&ovs-log, > > >but from the time the open vSwitch initializes. > > >Also any sort of config for DPDK you have made (bound devices, > hugepages, > > >...). > > > > > >That is what would be needed to try reviewing your setup. > > > > > > > > > > > > > > > > > >Christian Ehrhardt > > >Software Engineer, Ubuntu Server > > >Canonical Ltd > > > > > >On Tue, Jul 12, 2016 at 6:30 AM, shyam yeduru <yedurush...@hotmail.com> > > >wrote: > > >Hi , > > > > > >Can any one help me or correct me if, my approach is wrong to test dpdk > > >along with OVS. > > > > > >Thanks > > >Shyam Yeduru > > >> From: acon...@redhat.com > > >> To: yedurush...@hotmail.com > > >> CC: christian.ehrha...@canonical.com; discuss@openvswitch.org > > >> Subject: Re: [ovs-discuss] OVS+DPDK issue on Ubuntu 16.04 > > >> Date: Mon, 11 Jul 2016 13:28:33 -0400 > > > > > >> > > >> shyam yeduru <yedurush...@hotmail.com> writes: > > >> > > >> > Hi , > > >> > > > >> > Sorry for confusing you. I will explain my issue clearly. > > >> > > > >> > We have installed OVS and DPDK on Ubuntu14.04. We have done our > > >configuration using Physical > > >> > NIC and Virtual > > >> > Functions (SR-IOV produced Interfaces). > > >> > > > >> > We have followed this link: > > >> > > https://software.intel.com/en-us/articles/using-open-vswitch-with-dpdk- > > >for-inter-vm-nfv-applications > > >> > > > >> > > > >> > We are unable to add dpdk on top of OVS bridge. > > >> > > > >> > Server configurations : > > >> > root@kvmsriov:~# cat /proc/cmdline > > >> > BOOT_IMAGE=/vmlinuz-4.4.0-28-generic root=/dev/mapper/kvmsriov-- > > >vg-root ro intel_iommu=on > > >> > > > >> > root@kvmsriov:~# grep Huge /proc/meminfo > > >> > AnonHugePages: 5595136 kB > > >> > HugePages_Total: 256 > > >> > HugePages_Free: 256 > > >> > HugePages_Rsvd: 0 > > >> > HugePages_Surp: 0 > > >> > Hugepagesize: 2048 kB > > >> > root@kvmsriov:~# > > >> > > > >> > root@kvmsriov:~# dpdks -s > > >> > Network devices using DPDK-compatible driver > > >> > ============================================ > > >> > 0000:07:00.0 '82599ES 10-Gigabit SFI/SFP+ Network Connection' > drv=vfio- > > >pci unused=ixgbe > > >> > 0000:07:00.1 '82599ES 10-Gigabit SFI/SFP+ Network Connection' > drv=vfio- > > >pci unused=ixgbe > > >> > 0000:07:10.0 '82599 Ethernet Controller Virtual Function' > drv=vfio-pci > > >unused=ixgbevf > > >> > 0000:07:10.1 '82599 Ethernet Controller Virtual Function' > drv=vfio-pci > > >unused=ixgbevf > > >> > Network devices using kernel driver > > >> > =================================== > > >> > 0000:03:00.0 'NetXtreme BCM5719 Gigabit Ethernet PCIe' if=eno1 > drv=tg3 > > >unused=vfio-pci > > >> > *Active* > > >> > 0000:03:00.1 'NetXtreme BCM5719 Gigabit Ethernet PCIe' if=eno2 > drv=tg3 > > >unused=vfio-pci > > >> > 0000:03:00.2 'NetXtreme BCM5719 Gigabit Ethernet PCIe' if=eno3 > drv=tg3 > > >unused=vfio-pci > > >> > 0000:03:00.3 'NetXtreme BCM5719 Gigabit Ethernet PCIe' if=eno4 > drv=tg3 > > >unused=vfio-pci > > >> > Other network devices > > >> > ===================== > > >> > <none> > > >> > > > >> > OVS > > >> > root@kvmsriov:~# ovs-vsctl show > > >> > 910cdc54-e27f-4f5b-ae01-d180df6973ec > > >> > Bridge "br0" > > >> > Port "vhost-user1" > > >> > Interface "vhost-user1" > > >> > type: dpdkvhostuser > > >> > error: "could not open network device vhost-user1 (Address family > not > > >supported by > > >> > protocol)" > > >> > Port "dpdk0" > > >> > Interface "dpdk0" > > >> > type: dpdk > > >> > error: "could not open network device dpdk0 (Address family not > > >supported by protocol)" > > >> > Port "br0" > > >> > Interface "br0" > > >> > type: internal > > >> > Bridge "ovsbr0" > > >> > Port "vnet1" > > >> > Interface "vnet1" > > >> > Port "ovsbr0" > > >> > Interface "ovsbr0" > > >> > type: internal > > >> > Port "vnet2" > > >> > Interface "vnet2" > > >> > ovs_version: "2.5.0" > > >> > root@kvmsriov:~# > > >> > > > >> > Enclosed the logs of the server here with. Please do the needful. > > >> > root@kvmsriov:~# tailf /var/log/openvswitch/ovs-vswitchd.log > > >> > 2016-07-07T14:55:08.311Z|00091|bridge|INFO|bridge br0: using > datapath > > >ID 0000e21cf47fa440 > > >> > 2016-07-07T14:55:08.311Z|00092|connmgr|INFO|br0: added service > > >controller > > >> > "punix:/var/run/openvswitch/br0.mgmt" > > >> > 2016-07-07T14:55:13.488Z|00093|memory|INFO|peak resident set size > > >grew 93% in last > > >> > 600282.6 seconds, from 117000 kB to 225472 kB > > >> > 2016-07-07T14:55:13.488Z|00094|memory|INFO|handlers:16 ports:4 > > >revalidators:8 rules:10 > > >> > 2016-07-07T14:55:19.411Z|00095|netdev|WARN|could not create netdev > > >dpdk0 of unknown type > > >> > dpdk > > >> > 2016-07-07T14:55:19.411Z|00096|bridge|WARN|could not open network > > >device dpdk0 (Address > > >> > family not supported by protocol) > > >> > 2016-07-07T14:55:37.723Z|00097|netdev|WARN|could not create netdev > > >vhost-user1 of unknown > > >> > type dpdkvhostuser > > >> > 2016-07-07T14:55:37.723Z|00098|bridge|WARN|could not open network > > >device vhost-user1 > > >> > (Address family not supported by protocol) > > >> > 2016-07-07T14:55:37.723Z|00099|netdev|WARN|could not create netdev > > >dpdk0 of unknown type > > >> > dpdk > > >> > 2016-07-07T14:55:37.723Z|00100|bridge|WARN|could not open network > > >device dpdk0 (Address > > >> > family not supported by protocol) > > >> > > > >> > Please advise.... > > >> > > > >> > Thanks > > >> > Shyam Yeduru > > >> > > > >> > > > >> > > ---------------------------------------------------------------------------------- > > >> > From: christian.ehrha...@canonical.com > > >> > Date: Thu, 7 Jul 2016 08:12:10 +0200 > > >> > Subject: Re: [ovs-discuss] OVS+DPDK issue on Ubuntu 16.04 > > >> > To: yedurush...@hotmail.com > > >> > CC: discuss@openvswitch.org > > >> > > > >> > Hi, > > >> > I beg a pardon but I'm not entirely clear what you mean with "... > mount > > >the Intel 10gig ..." > > >> > Anyway what I've seen most often is that people struggle with some > core > > >parts of the setup and > > >> > then get refused by OVS trying to add the DPDK port. > > >> > What you report "...we are not able to add dpdk0 port to ovs > bridge..." > > >sounds very similar. > > >> > > > >> > In the past all questions I got only needed to check logs, identify > the issue > > >in base ovs+dpdk setup > > >> > and then things started to work for them. > > >> > Please take a look at > > >> > http://askubuntu.com/questions/786510/using-openvswitch-with-dpdk- > > >in-ubuntu-16-04/789203#789203 > > >> > > > >> > > > >> > If it helps you please give it an upvote and let me know. > > >> > I might consider adding this as a troubleshooting section to the > > >serverguide if this really is a common > > >> > case. > > >> > > > >> > Kind Regards, > > >> > Christian > > >> > > > >> > Christian Ehrhardt > > >> > Software Engineer, Ubuntu Server > > >> > Canonical Ltd > > >> > > > >> > On Thu, Jul 7, 2016 at 6:54 AM, shyam yeduru > > ><yedurush...@hotmail.com> wrote: > > >> > > > >> > Hi Christian, > > >> > > > >> > Thanks for writing us. We are able to mount the Intel 10gig DPDK > > >Supported NIC Cards as > > >> > stated in below url. > > >> > Our Test Cases: > > >> > 1.0 Intel 10gig with Pass Through on to Vyatta Router , Traffic > Generator > > >was IXIA (No DPDK > > >> > Enabled Interfaces) > > >> > 2.0 Intel 10gig with Pass Through on to Vyatta Router , Traffic > Generator > > >was IXIA ( DPDK > > >> > Enabled Interfaces) > > >> > 3.0 OVS Bridge Interfaces on to Vyatta Router, Traffic Generator > was IXIA > > >(No DPDK ) > > >> > 4.0 OVS Bridge Interfaces on to Vyatta Router, Traffic Generator > was IXIA > > >(DPDK) > > >> > > > >> > From the above 4 scenarios, we are not able to add dpdk0 port to ovs > > >bridge (4 Test Cases). > > >> > > > >> > OVS+DPDK > > >> > > > >> > http://openvswitch.org/support/dist-docs/INSTALL.DPDK.md.txt > > >> > > > >> > Pls advise, how to add the ovs along with dpdk . > > >> > > > >> > Thanks > > >> > Shyam yeduru > > >> > > ---------------------------------------------------------------------------------- > > >> > From: christian.ehrha...@canonical.com > > >> > Date: Tue, 5 Jul 2016 18:32:15 +0200 > > >> > Subject: Re: [ovs-discuss] OVS+DPDK issue on Ubuntu 16.04 > > >> > To: yedurush...@hotmail.com > > >> > CC: discuss@openvswitch.org; sy00454...@techmahindra.com > > >> > > > >> > Hi, > > >> > The TL;DR is that in Ubuntu 16.04 the base openvswitch-switch > package > > >knows nothing about > > >> > dpdk. > > >> > But the openvswitch-switch-dpdk package does. > > >> > > > >> > please follow the whole page around > > >> > https://help.ubuntu.com/16.04/serverguide/DPDK.html#dpdk- > > >openvswitch for some > > >> > guidance. > > >> > > > >> > Christian Ehrhardt > > >> > Software Engineer, Ubuntu Server > > >> > Canonical Ltd > > >> > > > >> > On Mon, Jul 4, 2016 at 9:51 AM, shyam yeduru > > ><yedurush...@hotmail.com> wrote: > > >> > > > >> > Hi Team, > > >> > > > >> > We have used ovs+dpdk installed and trying to test with Brocade > Vyatta > > >VNF which is > > >> > DPDK Supported. We were not able to add dpdk0 port to OVS Bridge. > > >> > > > >> > Error log : > > >> > > > >> > 2016-06-16T19:28:29.819Z|00021|bridge|INFO|bridge ovsbr0: added > > >interface ovsbr0 > > >> > on port 65534 > > >> > 2016-06-16T19:28:29.819Z|00022|bridge|INFO|bridge ovsbr0: added > > >interface vnet0 on > > >> > port 2 > > >> > 2016-06-16T19:28:29.819Z|00023|bridge|INFO|bridge ovsbr0: added > > >interface > > >> > enp7s16f4 on port 1 > > >> > 2016-06-16T19:28:29.819Z|00024|netdev|WARN|could not create netdev > > >dpdk0 of > > >> > unknown type dpdk > > >> > > >> This usually implies that dpdk was not enabled. Can you send the > output > > >> of 'ps aux | grep ovs'? Specifically, DPDK must be initialized > > >> explicitly to be usable (ie: for versions 2.5.0 and earlier, by > passing > > >> arguments on the command line). This can also indicate that the > > >> openvswitch installed does not even have compiled support for dpdk > > >> devices. > > >> > > >> > 2016-06-16T19:28:29.819Z|00025|bridge|WARN|could not open network > > >device dpdk0 > > >> > (Address family not supported by protocol) > > >> > 2016-06-16T19:28:29.819Z|00026|bridge|INFO|bridge ovsbr1: added > > >interface ovsbr1 > > >> > on port 65534 > > >> > 2016-06-16T19:28:29.819Z|00027|netdev|WARN|could not create netdev > > >vhost-user1 > > >> > of unknown type dpdkvhostuser > > >> > 2016-06-16T19:28:29.819Z|00028|bridge|WARN|could not open network > > >device > > >> > vhost-user1 (Address family not supported by protocol) > > >> > 2016-06-16T19:28:29.819Z|00029|bridge|INFO|bridge ovsbr0: using > > >datapath ID > > >> > 0000c67be1a7aa45 > > >> > 2016-06-16T19:28:29.820Z|00030|connmgr|INFO|ovsbr0: added service > > >controller > > >> > "punix:/var/run/openvswitch/ovsbr0.mgmt" > > >> > 2016-06-16T19:28:29.856Z|00031|bridge|INFO|bridge ovsbr1: using > > >datapath ID > > >> > 0000821322a5cb42 > > >> > 2016-06-16T19:28:29.856Z|00032|connmgr|INFO|ovsbr1: added service > > >controller > > >> > "punix:/var/run/openvswitch/ovsbr1.mgmt" > > >> > 2016-06-16T19:28:29.894Z|00033|netdev|WARN|could not create netdev > > >dpdk0 of > > >> > unknown type dpdk > > >> > 2016-06-16T19:28:29.894Z|00034|bridge|WARN|could not open network > > >device dpdk0 > > >> > (Address family not supported by protocol) > > >> > 2016-06-16T19:28:29.894Z|00035|netdev|WARN|could not create netdev > > >vhost-user1 > > >> > of unknown type dpdkvhostuser > > >> > 2016-06-16T19:28:29.894Z|00036|bridge|WARN|could not open network > > >device > > >> > vhost-user1 (Address family not supported by protocol) > > >> > 2016-06-16T19:28:29.896Z|00037|bridge|INFO|ovs-vswitchd (Open > > >vSwitch) 2.5.0 > > >> > > > >> > Operating System : Ubuntu 16.04 > > >> > Hardward : > > >> > Manufacturer: HP > > >> > Product Name: ProLiant DL380p Gen8 > > >> > Intel 10gig DPDK Support with Intel SFP’s > > >> > OpenvSwitch : > > >> > Architecture: amd64 > > >> > Source: openvswitch > > >> > Version: 2.5.0-0ubuntu1 > > >> > Depends: kmod | module-init-tools, netbase, openvswitch-common (= > > >2.5.0-0ubuntu1), > > >> > procps, python-argparse, uuid-runtime, init-system-helpers (>= > 1.18~), > > >lsb-base (>= > > >> > 4.1+Debian11ubuntu7), python:any, libc6 (>= 2.14), libcap-ng0, > libssl1.0.0 > > >(>= 1.0.0) > > >> > Filename: pool/main/o/openvswitch/openvswitch-switch_2.5.0- > > >0ubuntu1_amd64.deb > > >> > > > >> > OVS+DPDK > > >> > Architecture: amd64 > > >> > Source: openvswitch > > >> > Version: 2.5.0-0ubuntu1 > > >> > Depends: dpdk, openvswitch-switch (= 2.5.0-0ubuntu1), libc6 (>= > 2.14), > > >libcap-ng0, > > >> > libdpdk0 (>= 2.2), libssl1.0.0 (>= 1.0.0) > > >> > Filename: pool/main/o/openvswitch/openvswitch-switch-dpdk_2.5.0- > > >0ubuntu1_amd64.deb > > >> > > > >> > Please advise, how do we proceed further and achieve configurations. > > >> > _______________________________________________ > > >> > discuss mailing list > > >> > discuss@openvswitch.org > > >> > http://openvswitch.org/mailman/listinfo/discuss > > >> > > > >> > _______________________________________________ > > >> > discuss mailing list > > >> > discuss@openvswitch.org > > >> > http://openvswitch.org/mailman/listinfo/discuss > > > > > >
_______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss