modprobe sch_htb
On Tue, Jul 26, 2016 at 05:34:41PM +0000, álvaro wrote: > Maybe that's the problem, I haven't changed anything about the kernel module, > how can I load the kernel module for htb? > > > > ________________________________ > From: Ben Pfaff <b...@ovn.org> > Sent: Tuesday, July 26, 2016 4:29 PM > To: álvaro > Cc: discuss@openvswitch.org > Subject: Re: [ovs-discuss] Queue stats don't appear > > It looks like you're doing everything right so I'm confused. > Is the kernel module for htb loaded? > > On Mon, Jul 25, 2016 at 09:05:55PM +0000, álvaro wrote: > > I've just checked the logs and i didn't see nothing weird. > > > > I thing that maybe I've not added queues in the qos. > > > > When I check with ovs-vsctl list queue appears this: > > > > mininet@mininet-vm:~$ sudo ovs-vsctl list queue > > > > _uuid : 5dcd4bc4-4706-4e30-86b1-dc2c2a13f499 > > > > dscp : [] > > > > external_ids : {} > > > > other_config : {max-rate="1000000000", min-rate="1000000000"} > > > > > > _uuid : 4f688828-a5e7-4d15-8aed-9193b0742610 > > > > dscp : [] > > > > external_ids : {} > > > > other_config : {max-rate="4000000", min-rate="4000000"} > > > > > > _uuid : a8546246-3b5f-40b1-8433-0733203740bf > > > > dscp : [] > > > > external_ids : {} > > > > other_config : {max-rate="4000000", min-rate="4000000"} > > > > > > _uuid : f7a521ce-0031-47e3-8412-25b5babde47e > > > > dscp : [] > > > > external_ids : {} > > > > other_config : {max-rate="20000", min-rate="5000"} > > > > but when I put ovs-ofctl queue-stats s1 it says that there are 0 queues > > maybe because I didn't add. > > I don't know very well how to configure a queue, how would you do from > > scratch? > > Thanks again > > > > ________________________________ > > From: Ben Pfaff <b...@ovn.org> > > Sent: Monday, July 25, 2016 8:18 PM > > To: álvaro > > Cc: discuss@openvswitch.org > > Subject: Re: [ovs-discuss] Queue stats don't appear > > > > That looks OK to me. You might check your OVS logs for related > > warnings. > > > > On Mon, Jul 25, 2016 at 07:06:42PM +0000, álvaro wrote: > > > > > > Yes I did, with this command: > > > > > > ovs-vsctl -- set Port s1-eth1 qos=@newqos -- > > > > > > --id=@newqos create QoS type=linux-htb other-config:max-rate=1000000000 > > > queues=0=@q0 -- > > > > > > --id=@q0 create Queue other-config:min-rate=4000000 > > > other-config:max-rate=4000000 > > > > > > > > > and when I check with: > > > > > > sudo ovs-vsctl list queue > > > > > > appears the uuid of the queues and the configuration that I've chosen, > > > but when I try to get the stats either with the: > > > > > > ova-ofctl queue-stats or with the QueueStatsReceived method from POX > > > nothing appears. > > > > > > I don't know if I've configured the queue in the correct way, if you can > > > tell me how should I configure the queue of a port switch to get the > > > stats like tx_byte, tx_packet, tx_error I would appreciate. > > > > > > > > > ________________________________ > > > From: Ben Pfaff <b...@ovn.org> > > > Sent: Monday, July 25, 2016 4:24 PM > > > To: álvaro > > > Cc: discuss@openvswitch.org > > > Subject: Re: [ovs-discuss] Queue stats don't appear > > > > > > On Mon, Jul 25, 2016 at 10:17:19AM +0000, álvaro wrote: > > > > Hi, I'm trying to get the queue stats of the network, I make a request > > > > to the controller and use the QueueStatsReceived with a handler, but > > > > when I print the stats nothing appears(even saturating switch ports), > > > > with the FlowStats and PortStats works normally. > > > > > > > > Anyone knows why always appear "[]" without stats in? > > > > > > Did you configure queues? _______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss