On Fri, Aug 19, 2016 at 09:33:28PM +0200, james hopper wrote: > Thanks Ben for your response. As mentioned, I have tried matching on dl_vlan > previously. Furthermore, vlan_tci=0 is perfectly matching the untagged > incoming > packets. I am able to switch Native vlan traffic from vlan 10 (untagged > traffic). But the tagged traffic does not match vlan_tci=0x1000/0x1000 rule. > Here is what I have tried so far. > > Packets are tagged with vlan_id = 20 > > ovs-ofctl add-flow br0 "table=0, in_port=1, actions=output:2" > ovs-ofctl add-flow br0 "table=0, in_port=2, actions=output:1" > > ovs-ofctl add-flow br0 "table=0, in_port=1, dl_vlan=20, actions=output:2" > ovs-ofctl add-flow br0 "table=0, in_port=2, dl_vlan=20, actions=output:1" > > ovs-ofctl add-flow br0 "table=0, in_port=1, vlan_tci=0x1000/0x1000, actions= > output:2" > ovs-ofctl add-flow br0 "table=0, in_port=2, vlan_tci=0x1000/0x1000, actions= > output:1" > > ovs-ofctl add-flow br0 "table=0, in_port=1, dl_type=0x8100, actions=output:2" > ovs-ofctl add-flow br0 "table=0, in_port=2, dl_type=0x8100, actions=output:1" > > just to check if the rules are being triggered, I also tried dropping the > packets on OVS. > ovs-ofctl add-flow br0 "table=0, dl_type=0x8100, actions=drop" > ovs-ofctl add-flow br0 "table=0, vlan_tci=0x1000/0x1000, actions=drop" > ovs-ofctl add-flow br0 "table=0, dl_vlan=20, actions=drop"
None of your flows specify a priority. That's probably the problem. _______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss