Hi Jesse,
I am trying GENEVE tunneling via OVS bridge port using ovs-vsctl tool on my two
servers which are connected back to back
and running latest net-next kernel.
eth1- 192.168.44.44
eth2- 192.168.44.45
br2 [Setup 1] - 192.168.55.44
br2 [Setup 2] - 192.168.55.45
Setup 1
Setup 2
##########################
#########################
OVS br2 -------------- eth1 - ### --------------------------------------- ###
- eth2 ---------------OVS br2
##########################
#########################
I have configured OVS using below commands -
Setup 1
ovs-vsctl add-br br2
ovs-vsctl add-port br2 gnv0 -- set interface gnv0 type=geneve
options:remote_ip=192.168.44.45 options:key=01 options:dst_port=4789
Setup 2
ovs-vsctl add-br br2
ovs-vsctl add-port br2 gnv0 -- set interface gnv0 type=geneve
options:remote_ip=192.168.44.44 options:key=01 options:dst_port=4789
When I run traffic between both OVS bridge - I see that it uses geneve header
of size 8 bytes.
I was wondering if I could use GENEVE with options using OVS ? which would have
geneve header size more than 8 bytes ?
I couldn't find anything about what arguments I should be using with ovs-vsctl
on both setups to use GENEVE with options ?
Could you please supply necessary configuration/commands which I can try to use
GENEVE with options while running traffic ??
Thanks,
Manish
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss
