Which image are you using? I used the pyneo image and upgraded the hell out of it - it's running from NAND (with 15G /home and 64M swap on uSD), got rid of pyneo, got bloody loads of stuff on it now, even X (just want a 640x480 screen and a pointing device). Heh, I even got XFCE on it at one point (took seven minutes to load, had to use it via ssh, laggy as hell, but was cool knowing it was running on something with so little power).

Speaking of which, did the new pyneo-Debian-compatible kernel come out? Mine's a year old and won't support the subpixel fonts.

Mark -


On 14/04/11 18:34, Ernest Kugel wrote:
Hi guys, I am trying to follow the instructions for building a release image from the wiki. Just wanted to ask if anyone on Debian 6 have seen what appears to be errors with pango, which break the build? For me, the deal breaker seems to be related the following line, but I might be misreading the awful log:

/usr/lib/libgobject-2.0.so: could not read symbols: File in wrong format

The full log is available zipped here:

http://xeps.no-ip.org/qi/ben/openwrt-xburst_build-debian6.0.1-20110413.out.zip

And as a txt here:

http://xeps.no-ip.org/qi/ben/openwrt-xburst_build-debian6.0.1-20110413.txt

I don't think I've seen this on Ubuntu, and it's by no means "urgent" ;)

_______________________________________________
Qi Hardware Discussion List
Mail to list (members only): discussion@lists.en.qi-hardware.com
Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion


_______________________________________________
Qi Hardware Discussion List
Mail to list (members only): discussion@lists.en.qi-hardware.com
Subscribe or Unsubscribe: 
http://lists.en.qi-hardware.com/mailman/listinfo/discussion

Reply via email to