Cristian Paul Pe?aranda Rojas wrote: > I cant wait to see it wired to something ... :-)
Thy wish is my command :-) But first, a shiny new front plate. This time made of unclad FR4: http://downloads.qi-hardware.com/people/werner/labsw/tmp/labsw-0-fr4plate.jpg Next, the whole front assembly, mounted but not yet connected to the PCB: http://downloads.qi-hardware.com/people/werner/labsw/tmp/labsw-0-front-wires.jpg This is roughly where all the wires go (a few were mis-routed): http://downloads.qi-hardware.com/people/werner/labsw/tmp/labsw-0-inside.jpg This is what the whole contraption looks like with the box closed: http://downloads.qi-hardware.com/people/werner/labsw/tmp/labsw-0-off.jpg And here it is switching power to a blue LED: http://downloads.qi-hardware.com/people/werner/labsw/tmp/labsw-0-on.jpg The orange-looking LED is really red to the human eye. The orange is something my camera invented. The relays work quite well. The opto-coupler outputs are having difficulties with the current that crawls through the pull-ups. Some are fine, but some don't turn off completely. This is easy to fix, though. Next, teach the firmware a few more tricks. - Werner _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
