I finally got around to adding the buttons to the case design. This is the new shape: http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-20160531.png
With annotations: http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-ann-20160531.png I also had to grow the case a little bit more. The length is now 55 mm, up from 54 mm. I hope the buttons will be large enough to feel "good". They are 8 x 8 mm, a bit smaller than the roughly 9.6 x 10 mm of the buttons of the modified CR2032 device I use for experiments these days. The buttons are also slightly vertically off-center with respect to the display (about 10% of the display height), but that's probably unnoticeable. - Werner _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
