That's cos your pfsense box is a computer, not a switch.

The difference is that in an uplink port, the tx/rx lines are swapped over,
so that two switches think they're talking to a computer at the other end.

Some switches do this automagically.  If you remember modems and serial,
then its similar to "DCE cannot talk to another DCE the same way a DCE talks
to a DTE"    Shit I'm getting old.



-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 
Sent: Saturday, 4 March 2006 6:23 p.m.
To: [email protected]
Subject: Re: [pfSense-discussion] PANIC! problems with OPTx interfaces


All of the cables leaving the PfSense box went to switches. The one hooked
up to the LAN had the cable plug into a regular port on the LAN switch, all
the others were plugged into the "uplink" port on those switches. 

So, when I moved all of the cables from the "uplink" port on the switches,
to a regular port on those switches, all of a sudden things worked just
fine. 

Reply via email to