While this may or may not fix your proble, there is a newer version available that includes a lot of recent fixes in FreeBSD. Please give this a try: http://www.pfsense.com/~sullrich/RELENG_1_SNAPSHOT_03-10-2006/
Scott On 3/11/06, DarkFoon <[EMAIL PROTECTED]> wrote: > I'm experiencing some strange behavior with my beta2 box. > I have to keep manually renewing the WAN dhcp. I'll connect to a website > from a client on the LAN, and then maybe five minutes later, when I go > to another page, it "can't find the page" (none of my internet based > things work, actually), so I open up the webGUI and go to the interfaces > page, and there the WAN DHCP is down, and I have to click renew. > This probablem happens intermittently (like it started last night, and > now it's not doing it) > I don't quite understand even why this should be happening. I thought, > though, in the past that it automatically renewed DHCP leases on the > WAN. More than likely, however, it's a hardware or ISP problem, and has > nothing to do with the pfSense box. I thought I should post this here in > case this is a pfsense issue. > > My hardware: > pentium-MMX 200mhz > 64MB sd100 ram > 2x 3com 905* nics (one's a 905b-tx, the other a 905-tx) > CD-ROM platform (I don't like the noise added by harddrives) > floppy-drive (with my config) > > > The webGUI is a little sluggish in comparison to m0n0. But of course it > should be: m0n0 was designed for this kind of hardware, and pfsense, > well, wasn't. But, I like the features of pfsense more than m0n0, so I > use it now. > > $ dmesg > Copyright (c) 1992-2006 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 6.1-PRERELEASE #0: Thu Mar 2 04:13:56 UTC 2006 > [EMAIL PROTECTED]:/usr/obj.pfSense/usr/src/sys/pfSense.6 > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Pentium/P55C (200.46-MHz 586-class CPU) > Origin = "GenuineIntel" Id = 0x544 Stepping = 4 > Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> > real memory = 62914560 (60 MB) > avail memory = 51826688 (49 MB) > Intel Pentium detected, installing workaround for F00F bug > wlan: mac acl policy registered > kbd1 at kbdmux0 > ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, > RF5413) > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > cpu0 on motherboard > pcib0: <Host to PCI bridge> pcibus 0 on motherboard > pci0: <PCI bus> on pcib0 > isab0: <PCI-ISA bridge> at device 1.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <SiS 5513 UDMA33 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4000-0x400f at device 1.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xf000-0xf07f mem > 0xffadff80-0xffadffff irq 3 at device 13.0 on pci0 > miibus0: <MII bus> on xl0 > xlphy0: <3Com internal media interface> on miibus0 > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > xl0: Ethernet address: 00:10:4b:62:a1:f4 > xl1: <3Com 3c905-TX Fast Etherlink XL> port 0xec80-0xecbf irq 4 at > device 15.0 on pci0 > miibus1: <MII bus> on xl1 > nsphy0: <DP83840 10/100 media interface> on miibus1 > nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > xl1: Ethernet address: 00:60:08:1f:39:69 > pci0: <display, VGA> at device 20.0 (no driver attached) > pmtimer0 on isa0 > orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 > on isa0 > fdc0: [FAST] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 or not responding > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > unknown: <PNP0303> can't assign resources (port) > speaker0: <PC speaker> at port 0x61 on isa0 > unknown: <PNP0700> can't assign resources (port) > unknown: <PNP0c02> can't assign resources (port) > Timecounter "TSC" frequency 200456760 Hz quality 800 > Timecounters tick every 1.000 msec > Fast IPsec: Initialized Security Association Processing. > acd0: CDRW <YAMAHA CRW2100E/1.0K> at ata0-master PIO4 > GEOM_LABEL: Label for provider fd0 is msdosfs/ . > GEOM_LABEL: Label for provider acd0 is iso9660/pfSense. > Trying to mount root from cd9660:/dev/iso9660/pfSense > md0.uzip: 1511 x 65536 blocks > acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x02 ascq=0x00 error=0 > acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x02 ascq=0x00 error=0 > xl0: link state changed to UP > xl1: link state changed to UP > xl1: link state changed to DOWN > xl1: link state changed to UP > pflog0: promiscuous mode enabled > xl1: transmission error: 90 > xl1: tx underrun, increasing tx start threshold to 120 bytes > xl1: transmission error: 90 > xl1: tx underrun, increasing tx start threshold to 180 bytes > xl1: transmission error: 90 > xl1: tx underrun, increasing tx start threshold to 240 bytes > >