On Mon, Nov 09, 2009 at 07:54:57AM -0500, Chris Buechler wrote:

> Lots of options there - they're discussed in depth in the book. I

Alas -- Amazon.com estimates delivery for early January 2010. No
way to purchase an electronic copy I could get hold of earlier
than January?

> generally prefer getting a smaller WAN block and having the larger
> internal block routed to you, then you can use a combination of NAT

So you have a small address space just for the firewalls WANs and
other stuff, and get the networks handled to you? Using which protocol,
BGP?

Sorry for the dumb questions, I still completely blow at networking.

> and routed public IPs as needed, and easily add additional IP space in

So how does the layout look like WAN and LAN side? Which addresses
do the hosts on the LAN side have, private IPs (e.g. 10.x.x.x)?

> the future if needed. I don't like bridging in a serious colo
> environment, because of the complications possible with relying on
> STP, or hacks on the firewall. I would never setup the network with a
> design consideration that you can use it if the firewalls fail, that's
> why you have redundant firewalls.

Well, I don't have redundant firewalls in place yet. Of course
by the time I will add a second Ethernet line from the router
I will have enough critical systems up so that service down 
time should be down at a minimum.

-- 
Eugen* Leitl <a href="http://leitl.org";>leitl</a> http://leitl.org
______________________________________________________________
ICBM: 48.07100, 11.36820 http://www.ativel.com http://postbiota.org
8B29F6BE: 099D 78BA 2FD3 B014 B08A  7779 75B0 2443 8B29 F6BE

---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]

Commercial support available - https://portal.pfsense.org

Reply via email to