----- "Eugen Leitl" <[email protected]> wrote: > I'm attempting to simulate a production network 88.198.238.112/28 > with gateway 88.198.238.113 on the OPT1 interface (set to > 88.198.238.113) > but I'm too dense to figure out how override the default route, which > sends > the packet to WAN. > > I obviously need to do something along the lines of > route add -net 88.198.238.112/28 88.198.238.113
I'm not quite understanding but:- To route traffic you need distinct sub-nets. If you have the same subnet (or an overlap) on two interfaces of the pfsense box this is effectively an un-routable combination. Setting the gateway is something that happens on the client machine either by DHCP or manual settings carried out localy. The pfSense box will have a default route to it's next hop/gateway. Are attempting to set the clinet routing or pfSense routing when you talk about route add -net 88.198.238.112/28 88.198.238.113? The production network and the test network need total isolation with their own routes to the internet in order to get the routing to work without a lot of hassle Rob > > Help? > > -- > Eugen* Leitl <a href="http://leitl.org">leitl</a> http://leitl.org > ______________________________________________________________ > ICBM: 48.07100, 11.36820 http://www.ativel.com http://postbiota.org > 8B29F6BE: 099D 78BA 2FD3 B014 B08A 7779 75B0 2443 8B29 F6BE > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > > Commercial support available - https://portal.pfsense.org Blue Chip Technology Limited. Chowley Oak Lane, Tattenhall, Chester, Cheshire CH3 9EX --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
