Bjoern wrote: > Hi, I spent many hours trying to get piCorePlayer to accept the > orientation of my touch screen (display and mouse function). > The resolution is 1920x1080 and pCP is working actually fine however > when I rotated the display by 90 degrees the mouse (touch function) > doesn't turn. > So basically I see the mouse but left and right moves up and down. > > I followed this website: > > https://www.thefanclub.co.za/how-to/how-setup-picoreplayer-jivelite-use-waveshare-55-amoled-touchscreen > > in setting my screen up and the calibration as well as a test right > after the calibration worked perfectly. > The mouse is moving according to landscape format. > However when I boot and run piCorePlayer the mouse is wrong again > (portrait orientation) whereby the screen is correctly turned to > landscape. > > I checked the calibration files and they were saved as requested. > > I very much would appreciate your suggestion on this matter.
PCP is a RAM based system - so unless files are explicitly backed according to PCP rules, the files are lost after reboot. Cross posting is not good practice - this same query is on 3 threads now. ------------------------------------------------------------------------ bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=111756 _______________________________________________ diy mailing list diy@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/diy