From: "tang.junhui" <tang.jun...@zte.com.cn>
multipath judged whether multipathd service in running by check_daemon() when
executing
mutipath commands, check_daemon() try to connect to the multipathd service and
execute
"show dameon" command. The expected result is that the command will be failed
when the
service is not running, however, mpath_connect() will activate the multipathd
service when
the service is not running, so check_daemon() always return with true. Another
problem is that
multipath command with -q parameter is not processed in coalesce_paths(). This
patch fix for
those two problems.
Signed-off-by: tang.junhui <tang.jun...@zte.com.cn>
---
libmultipath/configure.c | 85 +++++++++++++++++++++++++++---------------------
1 file changed, 48 insertions(+), 37 deletions(-)
diff --git a/libmultipath/configure.c b/libmultipath/configure.c
index 707e6be..d8a17a6 100644
--- a/libmultipath/configure.c
+++ b/libmultipath/configure.c
@@ -715,36 +715,36 @@ deadmap (struct multipath * mpp)
return 1; /* dead */
}
-int check_daemon(void)
+static int
+check_daemon(void)
{
int fd;
- char *reply;
- int ret = 0;
- unsigned int timeout;
- struct config *conf;
-
- fd = mpath_connect();
- if (fd == -1)
- return 0;
+ struct flock lock;
- if (send_packet(fd, "show daemon") != 0)
- goto out;
- conf = get_multipath_config();
- timeout = conf->uxsock_timeout;
- put_multipath_config(conf);
- if (recv_packet(fd, &reply, timeout) != 0)
- goto out;
-
- if (strstr(reply, "shutdown"))
- goto out_free;
-
- ret = 1;
+ fd = open(DEFAULT_PIDFILE, O_RDONLY);
+ if (fd < 0) {
+ if (errno == ENOENT)
+ return 0;
+ if (errno == EMFILE)
+ condlog(0, "failed to open file, increase max_fds at
%s", DEFAULT_CONFIGFILE);
+ else
+ condlog(0, "can not open pidfile %s: %s",
DEFAULT_PIDFILE, strerror(errno));
+ return -1;
+ }
-out_free:
- FREE(reply);
-out:
- mpath_disconnect(fd);
- return ret;
+ lock.l_type = F_WRLCK;
+ lock.l_start = 0;
+ lock.l_whence = SEEK_SET;
+ lock.l_len = 0;
+ if (fcntl(fd, F_GETLK, &lock) < 0) {
+ condlog(0, "can not get file locker, %s: %s", DEFAULT_PIDFILE,
strerror(errno));
+ close(fd);
+ return -1;
+ }
+ close(fd);
+ if (lock.l_type == F_UNLCK)
+ return 0;
+ return 1;
}
extern int
@@ -873,17 +873,28 @@ coalesce_paths (struct vectors * vecs, vector newmp, char
* refwwid, int force_r
if (r == DOMAP_DRY)
continue;
- conf = get_multipath_config();
- allow_queueing = conf->allow_queueing;
- put_multipath_config(conf);
- if (!is_daemon && !allow_queueing && !check_daemon()) {
- if (mpp->no_path_retry != NO_PATH_RETRY_UNDEF &&
- mpp->no_path_retry != NO_PATH_RETRY_FAIL)
- condlog(3, "%s: multipathd not running, unset "
- "queue_if_no_path feature", mpp->alias);
- if (!dm_queue_if_no_path(mpp->alias, 0))
- remove_feature(&mpp->features,
- "queue_if_no_path");
+ /* run as multipath command and the service is not running */
+ if (!is_daemon && !check_daemon()) {
+ conf = get_multipath_config();
+ allow_queueing = conf->allow_queueing;
+ put_multipath_config(conf);
+ /* no -q choice */
+ if (!allow_queueing) {
+ if (mpp->no_path_retry != NO_PATH_RETRY_UNDEF &&
+ mpp->no_path_retry !=
NO_PATH_RETRY_FAIL)
+ condlog(3, "%s: multipathd not running,
unset "
+ "queue_if_no_path feature",
mpp->alias);
+ if (!dm_queue_if_no_path(mpp->alias, 0))
+ remove_feature(&mpp->features,
+ "queue_if_no_path");
+ } else { /* with -q choice */
+ if (mpp->no_path_retry == NO_PATH_RETRY_UNDEF ||
+ mpp->no_path_retry ==
NO_PATH_RETRY_FAIL)
+ condlog(3, "%s: multipathd not running,
set "
+ "queue_if_no_path feature",
mpp->alias);
+ if (!dm_queue_if_no_path(mpp->alias, 1))
+ add_feature(&mpp->features,
"queue_if_no_path");
+ }
}
else if (mpp->no_path_retry != NO_PATH_RETRY_UNDEF) {
if (mpp->no_path_retry == NO_PATH_RETRY_FAIL) {
--
2.8.1.windows.1
--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
