On Sat, Sep 2, 2017 at 3:10 AM, Josef Bacik <[email protected]> wrote: > On Fri, Sep 01, 2017 at 04:05:33PM -0400, Mike Snitzer wrote: >> On Fri, Sep 01 2017 at 2:31pm -0400, >> Josef Bacik <[email protected]> wrote: >> >> > Hello, >> > >> > I'm looking at extending dm-log-writes to support multiple devices to log >> > to a >> > single log. The benefit for this is testing things like btrfs's raid >> > code, the >> > xfs realtime device thing, and even mdraid. I left room in the log format >> > to >> > change it as needed with this use case in mind, so I'm not worried about >> > that. >> > I'm more looking for verification that my plan doesn't suck, or if it does >> > suck >> > what would be a better approach. I'll lay out the different parts to try >> > and >> > make this as quick and concise as possible. >> > >> > 1) Add a "log-writes-log" target that just takes the single device we are >> > going >> > to use as the log. This will do the work of taking the log IO from the >> > actual >> > "log-writes" target and putting it in the log. >> > >> > 2) Extend the "log-writes" target table format to include an "id" at the >> > end of >> > the table line that will be used to indicate which device the log entry >> > will be >> > fore. In this case the "log device" portion will point at the >> > "log-writes-log" >> > device mapper target. Everything would work normally, except in this mode >> > we >> > send the log bio's down with bi_sector = 0 and let the "log-writes-log" >> > target >> > do the actual mapping for the bio. >> > >> > So to test with multiple devices you would have to do something like >> > >> > dmsetup create log --table "0 <size> log-writes-log <log device>" >> > dmsetup create lw1 --table "0 <size> log-writes <device> /dev/mapper/log 0" >> > dmsetup create lw2 --table "0 <size> log-writes <device> /dev/mapper/log 1" >> > mkfs.btrfs -d raid1 -m raid1 /dev/mapper/lw1 /dev/mapper/lw2 >> > mount /dev/mapper/lw1 /mnt >> > <do whatever> >> > umount /mnt >> > dmsetup remove lw1 >> > dmsetup remove lw2 >> > dmsetup remove log >> >> This example illustrates the need for a separate log device nicely. >> >> Though I'm not following why you'd want to override the bio's bi_sector >> to be 0 when issuing the IO to the "log-writes-log" target device. >> >> > Mike, I would simply add a new struct target_type for log-writes-log that >> > would >> > do it's own ->map function to re-route the bio's coming into them. I'd >> > also >> > change the ->ctr function of the log-writes target_type to handle the new >> > id >> > field and do the new fancy thing if we have that field populated. Does >> > that >> > sound reasonable from an implementation point of view? >> > >> > Any comments or suggestions are welcome. I haven't written any code yet >> > so I'm >> > open to other ideas. Thanks, >> >> I'm still missing what type of mapping the "log-writes-log" target would >> be doing if it just receives bios that have bi_sector of 0... I must be >> missing something basic? But wouldn't it be useful to preserve the >> original bio offset for the IO and somehow encode which dev "id" the IO >> came from (possibly as part of the per-bio-data) and use that as part of >> the new ->map method? >> > > Yeah sorry the bio's going to the "log-writes-log" target will be the log > entry > with the original sector information and device id plus the actual data that > was > written. The bi_sector will be 0 because "log-writes-log" is going to put it > where it actually goes, it's just a log so starts at sector 1 and goes on from > there based on whatever we're logging. See the lc->next_sector part we > currently have, in this new setup the lc->next_sector would only matter for > the > "log-writes-log" target, and is what would be used to populate the bio that we > are logging. Thanks, >
Me too was confused about the need for log-writes-log, but now I understand its purpose is to have a single logging kthread per log device. So basically, you could do the same thing without the need to setup the log-writes-log explicitly by the user and set it up / tear it down implicitly from log-writes device when setting up target for a new log device. I have no objection at all for the explicit setup step as long as we understand there is an alternative. Regarding the format of the log entry, please include in v2 format some sort of magic in entry header, I found it useful to detect log corruption during replay. I also found that if entry had hdr_len (the offset where hdr_data begins) if would have been easier for me to insert extra debugging fields (magic) into the header without breaking unmodified replay-log. (I added add magic after data, but that's just a simple example). Cheers, Amir. -- dm-devel mailing list [email protected] https://www.redhat.com/mailman/listinfo/dm-devel
