Cc: Martin Wilck <[email protected]>
Cc: Benjamin Marzinski <[email protected]>
Cc: Christophe Varoqui <[email protected]>
Cc: DM-DEVEL ML <[email protected]>
Signed-off-by: Xose Vazquez Perez <[email protected]>
---
 README.alua                | 2 +-
 libmultipath/hwtable.c     | 4 ++--
 multipath/multipath.conf.5 | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/README.alua b/README.alua
index b15eb487..5d2b1c64 100644
--- a/README.alua
+++ b/README.alua
@@ -6,7 +6,7 @@ To enable ALUA, the following options should be changed:
 - EMC CLARiiON/VNX:
    "Failover Mode" should be changed to "4" or "Active-Active 
mode(ALUA)-failover mode 4"
 
-- HPE 3PAR:
+- HPE 3PAR, Primera, and Alletra 9000:
    "Host:" should be changed to "Generic-ALUA Persona 2 (UARepLun, SESLun, 
ALUA)".
 
 - Promise VTrak/Vess:
diff --git a/libmultipath/hwtable.c b/libmultipath/hwtable.c
index 58fa7387..e884d8c7 100644
--- a/libmultipath/hwtable.c
+++ b/libmultipath/hwtable.c
@@ -107,7 +107,7 @@ static struct hwentry default_hw[] = {
         * HPE
         */
        {
-               /* 3PAR / Primera */
+               /* 3PAR / Primera / Alletra 9000 */
                .vendor        = "3PARdata",
                .product       = "VV",
                .pgpolicy      = GROUP_BY_PRIO,
@@ -225,7 +225,7 @@ static struct hwentry default_hw[] = {
                .prio_name     = PRIO_ALUA,
        },
        {
-               /* Nimble Storage */
+               /* Nimble Storage / HPE Alletra 6000 */
                .vendor        = "Nimble",
                .product       = "Server",
                .hwhandler     = "1 alua",
diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5
index 064e4826..c2b642dc 100644
--- a/multipath/multipath.conf.5
+++ b/multipath/multipath.conf.5
@@ -1540,7 +1540,7 @@ The vpd page abbreviation can be found by running 
\fIsg_vpd -e\fR. multipathd
 will use this information to gather device specific information that can be
 displayed with the \fI%g\fR wilcard for the \fImultipathd show maps format\fR
 and \fImultipathd show paths format\fR commands. Currently only the
-\fBhp3par\fR vpd page is supported.
+\fBhp3par\fR vpd page(for HPE 3PAR, Primera, and Alletra 9000) is supported.
 .TP
 .B hardware_handler
 The hardware handler to use for this device type.
-- 
2.31.1

--
dm-devel mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/dm-devel

Reply via email to