Works for me. Alper
On Nov 6, 2013, at 12:21 AM, h chan wrote: > Is the following also acceptable: > REQ1: Distributed processing > > IP mobility, network access and routing solutions provided by > DMM MUST enable distributed processing for mobility management > so that traffic can avoid traversing > mobility anchors that are in non-optimal routes. > > I am trying to write it in simple wording and not getting into a new term > such as “off path” > H Anthony Chan > > From: [email protected] [mailto:[email protected]] On Behalf Of Alper > Yegin > Sent: Tuesday, November 05, 2013 8:25 AM > To: dmm > Subject: [DMM] Req#1 > > Hello folks, > > REQ1: Distributed processing > > IP mobility, network access and routing solutions provided by > DMM MUST enable distributed processing for mobility management > so that traffic does not need to traverse centrally deployed > mobility anchors and thereby avoid non-optimal routes. > > The real issue is not the "central location of the anchor", but "off-path > location of the anchor". > > The triangular route is caused by forcing the packets to traverse an anchor > node that is not on the direct IP path between the MN and the CN. > > See the CNet-Homing proposal. > http://www.ietf.org/id/draft-yegin-dmm-cnet-homing-01.txt. We place the > anchor in corresponding network, or the ISP serving that network. Therefore, > the path going via that anchor does not cause triangulation. Some people may > perceive that as locating the anchor in a central location (though this time > it's not an "absolute/unchanging" center as implied in the current text). > > Therefore I recommend the following revision: > > REQ1: Distributed processing > > IP mobility, network access and routing solutions provided by > DMM MUST enable distributed processing for mobility management > so that traffic is not forced to traverse off-path > mobility anchors and thereby avoid non-optimal routes. > > Alper > > >
_______________________________________________ dmm mailing list [email protected] https://www.ietf.org/mailman/listinfo/dmm
