On Fri, 02 Mar 2018 11:09:05 +0100, Juergen wrote in message <49a0ea7c62f1817f00dfd58c016ea...@auk.ak-dyndns.org>:
> Hi, > > have the network-manager in jessie support for 3G modems? > > Wen i plugin a USB 3G modem, then should be starting the ..as a first step: "lsusb" or "lsusb -v" before and after you plug in anything usb, then "dmesg", to learn _whether_ your usb toy, indeed is known as e.g. an usb 3G modem. ..e.g. dmesg will often report missing driver firmware failures. > modemmanager, but in devuan jessie nothing happened. > > Wen imanually starts the modemmanager und then i plugin > the modem, this output comes in daemon.log: > > Mar 2 11:02:38 devuan-wkst ModemManager[3048]: <info> > (tty/ttyUSB0): released by > modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3 Mar 2 > 11:02:38 devuan-wkst ModemManager[3048]: <info> (tty/ttyUSB1): > released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3 > Mar 2 11:02:38 devuan-wkst ModemManager[3048]: <info> > (tty/ttyUSB2): released by > modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3 Mar 2 > 11:03:05 devuan-wkst ModemManager[3048]: <warn> (ttyUSB1): port > attributes not fully set Mar 2 11:03:05 devuan-wkst > ModemManager[3048]: <warn> (ttyUSB2): port attributes not fully set > Mar 2 11:03:06 devuan-wkst ModemManager[3048]: <warn> (ttyUSB0): > port attributes not fully set Mar 2 11:03:18 devuan-wkst > ModemManager[3048]: <info> Creating modem with plugin 'ZTE' and '3' > ports Mar 2 11:03:18 devuan-wkst ModemManager[3048]: <warn> > (ttyUSB2): port attributes not fully set Mar 2 11:03:18 devuan-wkst > ModemManager[3048]: <info> Modem for device at > '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3' successfully > created Mar 2 11:03:18 devuan-wkst ModemManager[3048]: <warn> > (ttyUSB2) response array is not empty when using cached reply, > cleaning up 5 bytes Mar 2 11:03:19 devuan-wkst ModemManager[3048]: > <info> Modem: state changed (unknown -> disabled) > > "mmcli -L shows this: > > Found 1 modems: > /org/freedesktop/ModemManager1/Modem/1 [ZTE CORPORATION] MF190 > > And wen i configure "/etc/wvdial.conf": > > Dialer 3G] > Init2 = ATZ > Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > Init5 = AT+CGDCONT=1,"IP" > ISDN = 0 > Modem = /dev/ttyUSB2 > Modem Type = Analog Modem > Baud = 460800 > > and type this on command line: > > root@devuan-wkst:~# wvdial 3G > --> WvDial: Internet dialer version 1.61 > --> Initializing modem. > --> Sending: ATZ > OK > --> Sending: ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Sending: AT+CGDCONT=1,"IP" > AT+CGDCONT=1,"IP" > OK > --> Modem initialized. > > The modem should be worked, but the network-manager ignores the modem! > > Have the network-manager no support for 3G Modems? > > In an Debian Jessie installation the modem works with > network-manager, also in Slackware 14.2! > > Thanks, > Juergen Moebius > > > > > _______________________________________________ > Dng mailing list > Dng@lists.dyne.org > https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng -- ..med vennlig hilsen = with Kind Regards from Arnt Karlsen ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. _______________________________________________ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng