Hi, First of all thanks for replying. It seems the driver is installed according to usb-devices. The interesting stanza is the following:
T: Bus=07 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=04b5 ProdID=6cde Rev=00.00 S: Manufacturer=ODM S: Product=DSO Device C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) Running both the manufacturer's graphical frontend for the oscilloscope under wine and openhantek fail to detect the oscilloscope. For both of them the oscilloscope does not exist. The firmware and its loader have been extracted from the Windows drivers. Knowing the vendor ID and the Product ID I should be able to communicate with the oscilloscope. Any ideas how this can be done? _______________________________________________ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng