On Wed, 1 Jun 2022 17:16:05 -0500 o1bigtenor via Dng <dng@lists.dyne.org> wrote:
> On Wed, Jun 1, 2022 at 4:57 PM tito via Dng <dng@lists.dyne.org> wrote: > > > > On Wed, 1 Jun 2022 16:34:21 -0500 > > o1bigtenor via Dng <dng@lists.dyne.org> wrote: > > > > > Greetings > > > > > > When the parts get here I'm going to be installing Devuan testing on > > > the system. > > > > > > I have not ever installed like this so first the configuration. > > > > > > Ryzen 7 3800X > > > Asus TUF Gaming X570-Pro mobo > > > 64 GB ram > > > 2 - 1 TB M2 drives > > > 2 - 1 TB SSDs > > > > > > I want to set the system up so that the drives are 2 sets of Raid-1 with > > > (proposed) > > > set 1 > > > /efi, /boot, /, /usr, /usr/local, /var, swap > > > set 2 > > > /home > > > > > > How do I set up the raid arrays? > > > > They could be easily setup during installation process in the disk > > partitioning step if I recall > > it correctly. See https://wiki.debian.org/DebianInstaller/SoftwareRaidRoot > > for more info (just the first part). > > Interesting - - - that wiki is current as of 2012. > That's why I wasn't trusting the information - - - - the newest stuff > I could find was > some 3 or 4 years old and I've found that newer stuff has different > gotchas than > the older versions. > > The assumption is that LLVM is used on top of the array. (from the wiki) > Is that necessary? > (I've never used LLVM to date!) No. > > My idea was to partition the disks just like normal after the array was built. > Is that possible? Yes. > TIA > _______________________________________________ > Dng mailing list > Dng@lists.dyne.org > https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng _______________________________________________ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng