Hi, my windows 7 PC is connected with a WLAN card to my router. If my PC is connected to one router, which doesn't run dnsmasq, it got an ipv4 address only. It's 192.168.26.100. If I disconnect the PC from this router an let it connect to the router with dnsmasq, it got the address 192.168.25.2. It got the ipv4 gateway and dns address and dnsmasq dies with a segmentation fault:
root@WLAN-DSL5:~ #dnsmasq --no-daemon -C /etc/dnsmasq.conf dnsmasq: started, version v2.66test11 cachesize 200 dnsmasq: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts no-TFTP no-conntrack no-auth dnsmasq-dhcp: DHCP, IP range 192.168.25.100 -- 192.168.25.150, lease time 2d dnsmasq-dhcp: DHCPv6, IP range fec0::ffff:0:0:ffff:100 -- fec0::ffff:0:0:ffff:ffff, lease time 2d dnsmasq: using local addresses only for domain lan dnsmasq: reading /etc/resolv.conf dnsmasq: using nameserver ... dnsmasq: using nameserver ... dnsmasq: using nameserver ... dnsmasq: using nameserver ... dnsmasq: using local addresses only for domain lan dnsmasq: read /var/hosts - 24 addresses dnsmasq-dhcp: duplicate IP address ... in dhcp-config directive dnsmasq-dhcp: duplicate IP address ... in dhcp-config directive dnsmasq-dhcp: duplicate IP address ... in dhcp-config directive dnsmasq-dhcp: duplicate IP address ... in dhcp-config directive dnsmasq-dhcp: duplicate IP address ... in dhcp-config directive dnsmasq-dhcp: 14128106 available DHCP range: fec0::ffff:0:0:ffff:100 -- fec0::ffff:0:0:ffff:ffff dnsmasq-dhcp: 14128106 vendor class: 311 dnsmasq-dhcp: 14128106 DHCPINFORMATION-REQUEST(br0) 00:01:00:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx windows7-pc dnsmasq-dhcp: 14128106 requested options: 24:domain-search, 23:dns-server, 17:vendor-opts, dnsmasq-dhcp: 14128106 requested options: 32:information-refresh-time Segmentation fault root@WLAN-DSL5:~ # Regards, Hartmut _______________________________________________ Dnsmasq-discuss mailing list Dnsmasq-discuss@lists.thekelleys.org.uk http://lists.thekelleys.org.uk/mailman/listinfo/dnsmasq-discuss
