Hiya,
It's OK; I've sorted it. I took the output from chi_tra and pasted
it into
Google Translate. I forgot that tesseract simply recognises the
chars, not
translates them! Duh!
Hmm. It turns out that it's not the instructions; it's an advert ;-(
That’s odd. I got:
Instructions:
“Use steps: 1. Clean the repaired parts 2. Both ends of the steel foil
line 4. Heat the rounded surface and scrape off the new line 3. Apply
conductive paste”
“Matters needing attention: 1. The unused conductive paste should be
covered with a room temperature of <23 °C. When it is stored in the ice
storage room, it must be taken out before use and returned to room
temperature before use. 2. Avoid contact with broken skin and eyes.
Once etched, rinse immediately with soap and warm water. The conductive
silver paste has been formulated into a suitable method. It is not
necessary to add a thinner. It is necessary to build a special thinner
for the company. Poor conductivity or poor adhesion after baking, it is
likely that the drying temperature and drying time are not enough. The
dry explosion of the silver paste will not affect the conductivity of
the square resistance. Must be adjusted according to the requirements
of "Technical Specifications”.”
And the top bit:
“Thin film circuit conductive silver paste technical data (XD series)
XRD-XD series conductive silver paste is a high-tech nano material
product developed and produced in the world's most advanced
nanotechnology using imported high-quality raw materials. The product
has strong adaptability to conductive performance, single component,
fast curing at low temperature, excellent purchasing power,
anti-oxidation and extremely low square resistance. It is in the
leading position in China in terms of low temperature drying, adhesion
and electrical conductivity. Scope of application: mainly used for
plasma TV EMI filter glass plate, EM film, ITO film, LED, RFID antenna,
general film switch, flexible circuit, mobile phone keyboard, computer
built circuit, screen circuit, heating circuit, circuit repair And on
electronic circuits that require low temperature. Product features: 1.
With controllable conductivity. 2. Low temperature curing. 3.
Excellent adhesion and hiding power for various materials such as PC,
PET, PVCIPU and other films, resin plates, steel plates, glass, pots and
plates. 4. Square resistance: <0.1onms/sq@lmil”
--
Next meeting: BEC, Bournemouth, Tuesday, 2019-06-04 20:00
Check to whom you are replying
Meetings, mailing list, IRC, ... http://dorset.lug.org.uk/
New thread, don't hijack: mailto:dorset@mailman.lug.org.uk