I'm not using internal logging. I'm running the docker with the logging to the host. I have used the same options you have specified. The problem is that the below processes are not running inside docker container whereas the standalone dovecot is running these processes(meaning without container)
dovecot-Dovecot/auth dovecot-Dovecot/ssl-params dovecot-Director/lmtp dovecot-Director/ssl-params dovecot-Director/imap-login director Thanks & Regards, Naveen On Mon, Dec 30, 2019 at 3:16 PM Marc Roos <m.r...@f1-outsourcing.eu> wrote: > > If you are running your container as root. You will not have the issues > I encountered. Dovecot is dropping to the 'dovecot' and 'dovenull'(?) > when needed, this is fine. > > PS. I would not recommend using internal logging, use something like > this to log to the host or remote syslog. > docker run -v /dev/log:/dev/log -it dovecot-proxy > > > -----Original Message----- > Subject: Re: Issue running Dovecot in Docker Container > > Hi Marc, > > I can see the processes are running as a root in container environment. > Do you think that still have issues ? > Here is the processes running inside container: > > bash-4.2# ps -ef > UID PID PPID C STIME TTY TIME CMD > root 1 0 0 Dec27 ? 00:00:00 /bin/bash /bootstrap.sh > root 7 1 0 Dec27 ? 00:00:00 /usr/sbin/dovecot -F -c > /etc/dovecot/director.conf > root 8 1 0 Dec27 ? 00:00:00 /usr/sbin/dovecot -F > root 9 1 0 Dec27 ? 00:00:00 sleep 36000d > dovecot 10 8 0 Dec27 ? 00:00:00 dovecot-Dovecot/anvil > dovecot 14 7 0 Dec27 ? 00:00:00 dovecot-Director/anvil > root 267 8 0 Dec27 ? 00:00:00 dovecot-Dovecot/log > root 269 8 0 Dec27 ? 00:00:08 dovecot-Dovecot/config > root 281 7 0 Dec27 ? 00:00:00 dovecot-Director/log > root 283 7 0 Dec27 ? 00:00:00 dovecot-Director/config > > > > > Thanks & Regards, > Naveen > > > > On Mon, Dec 30, 2019 at 2:56 PM Marc Roos <m.r...@f1-outsourcing.eu> > wrote: > > > > I have noticed several issues with dovecot, trying to run it > without > root. Which is preferable in any container environment. Maybe you > would > like me to document these somewhere? So at some point they can be > applied. > > > -----Original Message----- > From: Naveen Reddy [mailto:naveenredd...@gmail.com] > Sent: 30 December 2019 09:02 > To: Aki Tuomi > Cc: dovecot@dovecot.org > Subject: Re: Issue running Dovecot in Docker Container > > Hi, I can see those values correctly with the doveconf -nc > command. > Here > is the part of output: > > bash-4.2# doveconf -nc /etc/dovecot/director.conf # 2.2.36 > (1f10bfa63): > /etc/dovecot/director.conf # OS: Linux > 4.1.12-112.14.11.el7uek.x86_64 > x86_64 Red Hat Enterprise Linux Server release 7.7 (Maipo) # > Hostname: > 69b492645b56 auth_debug = yes auth_default_realm = > xxxxxxxxxxxxxxxx > > auth_verbose = yes base_dir = /var/run/dovecot_director > debug_log_path = > $log_path director_mail_servers = xxxxxxxxxxxxxxxxxx > director_servers = > xxxxxxxxxxxxxxxxxxxx disable_plaintext_auth = no first_valid_uid = > 1000 > hostname = xxxxxxxxxxxxxxxxxxxx info_log_path = $log_path > instance_name > = Director lmtp_proxy = yes log_path = /dovecot.log > login_log_format_elements = user=<%u> method=%m rip=%r lip=%l > mpid=%e %c > home=%h > > Thanks & Regards, > Naveen > > > > On Fri, Dec 27, 2019 at 10:08 PM Aki Tuomi > <aki.tu...@open-xchange.com> > wrote: > > > > Can you check with `doveconf -nc /path/to/director.conf` > that the > values are actually set correctly? > > Aki > > On 27/12/2019 15:34 Naveen Reddy > <naveenredd...@gmail.com> > wrote: > > > > The conf.d files are not included. I have added > !include > conf.d/*.conf to director.conf and reloaded the dovecot and > director > services. > > conf.d/10-logging also has the following lines: > > log_path = /dovecot.log > info_log_path = $log_path > debug_log_path = $log_path > > > The /dovecot.log file still shows empty. Nothing > is being > logged to that file. > > > Thanks & Regards, > Naveen > > > > On Thu, Dec 26, 2019 at 10:52 PM Aki Tuomi < > aki.tu...@open-xchange.com> wrote: > > > > Do you have !include or !try_include in > director.conf? > The conf.d files are not included otherwise. > > Aki > > On 26/12/2019 11:27 Naveen Reddy < > naveenredd...@gmail.com> wrote: > > > I have tried these in the > 10-logging.conf but no > luck. There is nothing logged to the file. > > bash-4.2# ps -ef > UID PID PPID C STIME TTY > > TIME CMD > root 1 0 0 Dec23 ? > > 00:00:00 > /bin/bash /bootstrap.sh > root 8 1 0 Dec23 ? > > 00:00:00 > sleep 36000d > root 15681 0 0 08:51 > pts/1 > 00:00:00 bash > root 16340 0 0 09:19 ? > > 00:00:00 > /usr/sbin/dovecot -c /etc/dovecot/director.conf > dovecot 16341 16340 0 09:19 ? > > 00:00:00 > dovecot-Director/anvil > root 16342 16340 0 09:19 ? > > 00:00:00 > dovecot-Director/log > root 16344 16340 0 09:19 ? > > 00:00:00 > dovecot-Director/config > root 16390 0 0 09:22 ? > > 00:00:00 > /usr/sbin/dovecot -c /etc/dovecot/dovecot.conf > dovecot 16391 16390 0 09:22 ? > > 00:00:00 > dovecot-Dovecot/anvil > root 16392 16390 0 09:22 ? > > 00:00:00 > dovecot-Dovecot/log > root 16394 16390 0 09:22 ? > > 00:00:00 > dovecot-Dovecot/config > root 16406 15681 0 09:22 > pts/1 > 00:00:00 ps > -ef > > > The below processes are not > starting as well. > > dovecot-Dovecot/auth > dovecot-Dovecot/ssl-params > dovecot-Director/lmtp > dovecot-Director/ssl-params > dovecot-Director/imap-login > director > > Thanks & Regards, > Naveen > > > > On Tue, Dec 24, 2019 at 10:54 PM > Aki Tuomi < > aki.tu...@open-xchange.com> wrote: > > > > > > On 24/12/2019 > 12:33 > Naveen Reddy < > naveenredd...@gmail.com> wrote: > > > Hello, > > We need help with > an issue that we are > running into when we are trying to run Dovecot in Docker > container. > > Also how do we > enable debugging for > dovecot. Logs doesn't show any info about the issue. > > Below processes > are > not running when a > Director service is started: > > > dovecot-Dovecot/auth > > dovecot-Dovecot/ssl-params > > dovecot-Director/lmtp > > dovecot-Director/ssl-params > > dovecot-Director/imap-login director > > Here is the > version > that I'm running and > including the dovecot -n output below: > > bash-4.2# dovecot > --version > 2.2.36 > > > bash-4.2# dovecot > -n > # 2.2.36 (xxxxx): > /etc/dovecot/dovecot.conf > # OS: Linux > 4.1.12-112.14.11.el7uek.x86_64 > x86_64 Red Hat Enterprise Linux Server release 7.7 (Maipo) > # Hostname: XXXXXXX > auth_debug = yes > auth_default_realm > = xxxxxxxxxxxx > auth_verbose = yes > > disable_plaintext_auth = no > dotlock_use_excl = > no > hostname = > xxxxxxxxxxxxxxxx > instance_name = > Dovecot > > login_log_format_elements = user=<%u> > method=%m rip=%r lip=%l mpid=%e %c home=% domain=%d > mail_debug = yes > mail_fsync = always > mail_gid = imapd > mail_home = > /xxxxxxxxxxx/%d/%n > mail_location = > dbox:~/ > mail_uid = imapd > mmap_disable = yes > passdb { > args = > /etc/dovecot/lookups/ldap-pass.conf > driver = ldap > } > passdb { > args = > /etc/dovecot/lookups/xxxx.conf > driver = ldap > } > plugin { > stats_refresh = > 30 secs > stats_track_cmds > = yes > } > protocols = imap > lmtp > service auth { > client_limit = > 4096 > unix_listener > auth-userdb { > mode = 0777 > } > } > service imap-login > { > chroot = login > client_limit = 0 > > drop_priv_before_exec = no > executable = > imap-login > extra_groups = > group = > idle_kill = 0 > inet_listener > imap { > address = > port = 1144 > ssl = no > } > inet_listener > imaps { > address = > port = 994 > ssl = yes > } > privileged_group > = > process_limit = 0 > > process_min_avail > = 0 > protocol = imap > service_count = > 50 > type = login > user = > $default_login_user > vsz_limit = > 18446744073709551615 B > } > service imap { > service_count = > 50 > } > service lmtp { > executable = > lmtp > -L > inet_listener > lmtp { > address = > port = 10025 > } > } > service stats { > fifo_listener > stats-mail { > mode = 0600 > user = imapd > } > } > ssl_cert = > </xxxxxxx/cert/dovecot.pem > ssl_cipher_list = > XXXXXX > ssl_key = # > hidden, use -P to show it > ssl_protocols = > XXXXX > userdb { > args = > /etc/dovecot/lookups/ldap-user.conf > driver = ldap > } > userdb { > args = > /etc/dovecot/lookups/xxxxxxx.conf > driver = ldap > } > > > Thanks & Regards, > Naveen > > > > Try setting > > log_path=/dovecot.log > info_log_path=$log_path > debug_log_path=$log_path > --- > Aki Tuomi > > > --- > Aki Tuomi > > > --- > Aki Tuomi > > > > > >
