"Bill Ellis" <[EMAIL PROTECTED]> made an utterence to the drakelist gang ---------------------------------------------------------------------- Thanks to all who responded to my question about "Krylon". I chose the coax seal for that problem.
I have another situation this time it's with the Hustler 6-BTV Vertical I just purchased and am assembling. The connection to this antenna is by opening the end of the coax, about 2 inches, and making two leads, one with the braid and one with the center lead. They are then soldered to two lugs(supplied) and then srewed to the bottom of the vertical. It seems the only way I can weather protect this connection is with the Acrylic Plastic spray someone suggested. Any other thoughts? Thanks for any help, Bill Ellis, WB9CAC [EMAIL PROTECTED] ---------------------------------------------------------------------- On Behalf of "Bill Ellis" <[EMAIL PROTECTED]> Submissions: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: http://www.zerobeat.net Brought to you courtesy of TLCHost.net http://www.tlchost.net/ ----------------------------------------------------------------------