My T-4XC has different Pout depending on the position of the "transceive"
switch and in the CW Mode.
With transceive swith set on "separate"
Gain is at 2:30
Plate current is 300 ma
Pout is 100 watts
With transceive switch set on "rcvr"
Gain is at 2:30
Plate current is 320 ma
Pout is 117 watt
When transceive switch is on "xmtr"
Gain is at 2:30
Plate current is 140 ma
Pout is 19 watts
When transceive switch is on "xmtr"
Gain is at 5:00 (fully clockwise)
Palte current is 320 ma
Pout is 117 watts
What is pecular is that Pout when seperate compared to Pout when xmtr
supposedly uses the same oscillator signal for drive.
I did not see anything in the manual that looks like there is an alignment step
for this.
Comments?
Thanks
Jim
_______________________________________________
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
