Hi Gary:
You must be using those super-rare, special order, BIG finals! ;)
Curt
KU8L
On 12/3/2012 6:43 PM, Gary Poland wrote:
Make sure the bias voltage isn't set too high. It is also used in the
VOX circuit and can cause the relay to hang. If the finals are weak
you may have set the bias too high trying to get the PLATE meter to
read the 1000 ma final bias. Pull the 6EV7 and if the relay relaxes
the issue is not the relay. I have never had a relay hang on its own,
it was always the VOX circuit.
73, Gary
http://home.roadrunner.com/~w8pu
R-4A T4-X R-4B T4-XB R-4C T4-XC MS-4 L-4B RCS-4
2A 2B 2C 2NT 2CQ 2AS 4-LF
TR-4 TR-4C TR-4CW/RIT RV-4C MC-4
TR-7 RV-7 CW-75 MS-7
WH-7 W-4 WV-4 MN-2700 MN-4C MN-2000
UV-3 PS-3 TR-22C TR-33C AA-10 AC-10 MMK-22 TR-6
PRN1000
_______________________________________________
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
_______________________________________________
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
