Hi, (sorry for re-posting - I'm in a jam)
I'm fairly new to DRBD. I already configured a DRBD pair which works prefectly! I tried configuring the "timeout" value (in the "net" section of the drbd.conf file) and it seems like no matter what I do I get a timeout of approx 10 seconds. Am I doing something wrong (probably yes)? Basically what I do is I write to the Primary and in the middle of the IO I pull the Ethernet cable from the Secondary. I use iostat to monitor the IO and I see that IO resumes (locally) after 10 seconds.Reconnecting the cable back to the Secondary initiates the synchronization (as expected) Attached is my drbd.conf file. Thanks VJ resource mydb { protocol C; syncer {rate 30M;} device /dev/drbd1; disk /dev/drbd-dev/mydbdev; meta-disk internal; startup {degr-wfc-timeout 120; wfc-timeout 0;} net {connect-int 10; ping-int 10; timeout 30;} on SRVR1 {address 172.16.1.1:7789;} on SRVR2 {address 172.16.1.2:7789;} }
_______________________________________________ drbd-user mailing list drbd-user@lists.linbit.com http://lists.linbit.com/mailman/listinfo/drbd-user