HI all,
i resume this old post that didn't have an answer.
I am experiencing the same identical problem.
the 2 nodes are 2 KVM virtual machines on 2.6.30.5 that are supposed to
work in dual primary mode with OCFS on top pf DRBD.
The testbed is:
- machines are up and running, synced and in dual primary mode.
- when i shutdown -h one of the two, everything comes up correctly.
- when i reboot (KVM is quite fast), i see that the rebooted node
doesn't sync and disconnects.
This is strange because i don't see any configuration problem.
If i restart drbd, it comes up cleanly as well.
How to fix and what's the problem ?
This is the relevant portion of the log.
[ 7.444342] drbd: initialised. Version: 8.3.2 (api:88/proto:86-90)
[ 7.466196] drbd: GIT-hash: dd7985327f146f33b86d4bff5ca8c94234ce840e
build by p...@fat-tyre, 2009-07-03 15:35:39
[ 7.489085] drbd: registered as block device major 147
[ 7.500701] drbd: minor_table @ 0xffff8800ddd5ac80
[ 7.523703] block drbd1: Starting worker thread (from cqueue [1691])
[ 7.535696] block drbd1: disk( Diskless -> Attaching )
[ 7.551927] block drbd1: Found 6 transactions (6 active extents) in
activity log.
[ 7.574272] block drbd1: Method to ensure write ordering: barrier
[ 7.585844] block drbd1: max_segment_size ( = BIO size ) = 32768
[ 7.597424] block drbd1: drbd_bm_resize called with capacity == 104854328
[ 7.609724] block drbd1: resync bitmap: bits=13106791 words=204794
[ 7.632516] block drbd1: size = 50 GB (52427164 KB)
[ 7.647568] block drbd1: recounting of set bits took additional 0 jiffies
[ 7.659347] block drbd1: 0 KB (0 bits) marked out-of-sync by on disk
bit-map.
[ 7.671181] block drbd1: disk( Attaching -> UpToDate )
[ 7.682717] block drbd1: Barriers not supported on meta data device -
disabling
[ 7.773093] block drbd1: conn( StandAlone -> Unconnected )
[ 7.785603] block drbd1: Starting receiver thread (from drbd1_worker
[1698])
[ 7.808437] block drbd1: receiver (re)started
[ 7.824425] block drbd1: conn( Unconnected -> WFConnection )
[ 7.836513] block drbd1: bind before connect failed, err = -99
[ 7.852925] block drbd1: conn( WFConnection -> Disconnecting )
[ 7.868108] block drbd1: role( Secondary -> Primary )
[ 7.880114] block drbd1: Creating new current UUID
[ 8.064182] block drbd1: Discarding network configuration.
[ 8.075792] block drbd1: Connection closed
[ 8.087158] block drbd1: conn( Disconnecting -> StandAlone )
[ 8.098898] block drbd1: receiver terminated
[ 8.110451] block drbd1: Terminating receiver thread
Thanks,
Max
Richard Hector ha scritto:
Hi all,
One of my 2 machines doesn't seem to connect at boot time - doesn't
matter whether it's configured to come up as primary or secondary. This,
at a guess, seems relevant:
...
[ 29.196417] drbd0: conn( Unconnected -> WFConnection )
[ 29.196417] drbd0: bind before connect failed, err = -99
[ 29.196417] drbd0: conn( WFConnection -> Disconnecting )
...
I've tried to find any docs regarding this without success - that bind
is an internal kernel one, not bind(2) (the syscall), right? My
expertise at navigating the kernel source is rather limited ...
If I run /etc/init.d/drbd restart after boot, it comes up fine.
Both machines are Debian Lenny, amd64, with drbd 8.3 from backports.org.
Any suggestions? Any more useful info I can supply?
_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
