Hi all,
my latest drbd install seems awfully slow when resources are connected
and a bit better when disconnected. On the other hand, initial sync or
sync after i let one node fall behind and then sync, is fast as expected
and uses all available network bandwidth.
LV backing device speed:
Write: 446 MB/s Read: 477 MB/s
DRBD disconnected:
Write: 208 MB/s Read: 255 MB/s
DRBD connected:
Write: 73.4 MB/s Read: 255 MB/s
Expected DRBD connected:
Write: 200+MB/s Read: 400+MB/s
Below is more info. Please help me achieve at least network throughput
for sequential write.
CentOS 6.2: 2.6.32-220.7.1.el6.x86_64
DRBD version: 8.4.1 (api:1/proto:86-100)
(Seems like the same problem persists if i downgrade to 8.3.12)
2x1Ge network card bonded in round robin. MTU 9000.
Backing device is LVM on Software RAID 0.
No filesystems were used in the test.
Network speed tests are always stable around 1.75Gb/s. Tested with iperf.
[root@s2 drbd.d]# iperf -c 192.168.168.3
------------------------------------------------------------
Client connecting to 192.168.168.3, TCP port 5001
TCP window size: 27.8 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.168.2 port 49739 connected with 192.168.168.3 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 2.07 GBytes 1.78 Gbits/sec
Random drbd sync:
2: cs:SyncTarget ro:Secondary/Secondary ds:Inconsistent/UpToDate C r-----
ns:0 nr:1999064 dw:1998040 dr:0 al:0 bm:125 lo:3 pe:13 ua:2 ap:0
ep:1 wo:b oos:142260
[=================>..] sync'ed: 93.5% (142260/2140300)K
finish: 0:00:00 speed: 222,004 (222,004) want: 191,920 K/sec
2: cs:SyncTarget ro:Secondary/Primary ds:Inconsistent/UpToDate C r-----
ns:0 nr:1635328 dw:1633792 dr:0 al:0 bm:99 lo:4 pe:27 ua:3 ap:0
ep:1 wo:b oos:938496
[===========>........] sync'ed: 63.6% (938496/2572288)K
finish: 0:00:04 speed: 204,224 (204,224) want: 224,760 K/sec
Speed test of backing device:
[root@s3 ~]# dd if=/dev/zero of=/dev/diski/s2 bs=1M count=2512 oflag=direct
2512+0 records in
2512+0 records out
2634022912 bytes (2.6 GB) copied, 5.9058 s, 446 MB/s
[root@s3 ~]# dd if=/dev/diski/s2 of=/dev/null bs=1M count=2512 iflag=direct
2512+0 records in
2512+0 records out
2634022912 bytes (2.6 GB) copied, 5.5232 s, 477 MB/s
Speed test of drbd in disconnected mode:
[root@s3 ~]# dd if=/dev/zero of=/dev/drbd2 bs=1M count=2512 oflag=direct
2512+0 records in
2512+0 records out
2634022912 bytes (2.6 GB) copied, 12.6405 s, 208 MB/s
[root@s3 ~]# dd if=/dev/drbd2 of=/dev/null bs=1M count=2512 iflag=direct
2512+0 records in
2512+0 records out
2634022912 bytes (2.6 GB) copied, 10.3494 s, 255 MB/s
Speed test of drbd in connected mode:
[root@s3 ~]# dd if=/dev/zero of=/dev/drbd2 bs=1M count=2512 oflag=direct
2512+0 records in
2512+0 records out
2634022912 bytes (2.6 GB) copied, 35.8805 s, 73.4 MB/s
[root@s3 ~]# dd if=/dev/drbd2 of=/dev/null bs=1M count=2512 iflag=direct
2512+0 records in
2512+0 records out
2634022912 bytes (2.6 GB) copied, 10.3434 s, 255 MB/s
Currently active settings:
disk {
on-io-error detach;
resync-rate 420M;
#disk-barrier no;
#disk-flushes no;
#c-plan-ahead 0; #for syncer to work statically
c-max-rate 420M; #(222MB/s dosezeno)
al-extents 3389;
}
net {
# csums-alg crc32c;
sndbuf-size 0;
# max-buffers 8000;
# max-epoch-size 8000;
unplug-watermark 16;
after-sb-0pri discard-least-changes;
after-sb-1pri call-pri-lost-after-sb;
after-sb-2pri call-pri-lost-after-sb;
}
I did try the optimizing advice from:
http://www.drbd.org/users-guide/ch-latency.html
but improvements were marginal, if any at all.
Regards,
France
_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
