On Mon, Mar 12, 2012 at 01:25:12PM +0100, Michael Schwartzkopff wrote:
> Hm,
>
> somethings do not fit together. You configured a rate of 102M (Byte/s) and
> when you ask the DRBD it tells you that your configured a rate of 11M (Byte/s)
>
> Did your show us the /proc/drbd output of the above given config?
>
Hello Michael,
here's the /proc/drbd output:
# cat /proc/drbd
version: 8.3.7 (api:88/proto:86-91)
srcversion: EE47D8BF18AC166BE219757
0: cs:SyncSource ro:Primary/Secondary ds:UpToDate/Inconsistent C
r----
ns:2371132 nr:0 dw:0 dr:2378656 al:0 bm:144 lo:1 pe:2556 ua:1806
ap:0 ep:1 wo:d oos:3152530292
[>....................] sync'ed: 0.1% (3078640/3080948)M
finish: 59:10:08 speed: 14,628 (12,296) K/sec
I've been changing some disk params as recommended in the IRC (see
wo: entry), but sadly this has had no effect.
I've also tried using a different interface (one connected to a
gigabit switch), but sync speed was as low as before.
All the best & thanks for your comments,
Uwe
--
NIONEX --- Ein Unternehmen der Bertelsmann AG
_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
