Ok I managed to remove the logical volumes and drbdmanage uninit Then
remove-node on primary. Then tried to add-node again. I now get this:
root@ve1:# drbdmanage add-node ve2 192.168.202.2
Operation completed successfully
Operation completed successfully
Executing join command using ssh.
IMPORTANT: The output you see comes from ve2
IMPORTANT: Your input is executed on ve2
You are going to join an existing drbdmanage cluster.
CAUTION! Note that:
* Any previous drbdmanage cluster information may be removed
* Any remaining resources managed by a previous drbdmanage installation
that still exist on this system will no longer be managed by drbdmanage
Confirm:
yes/no: yes
Failed to find logical volume "drbdpool/.drbdctrl_0"
Failed to find logical volume "drbdpool/.drbdctrl_1"
Logical volume ".drbdctrl_0" created.
Logical volume ".drbdctrl_1" created.
You want me to create a v09 style flexible-size internal meta data block.
There appears to be a v09 flexible-size internal meta data block
already in place on /dev/drbdpool/.drbdctrl_0 at byte offset 4190208
Do you really want to overwrite the existing meta-data?
*** confirmation forced via --force option ***
Do you want to proceed?
*** confirmation forced via --force option ***
NOT initializing bitmap
md_offset 4190208
al_offset 4157440
bm_offset 4153344
Found some data
==> This might destroy existing data! <==
initializing activity log
Writing meta data...
New drbd meta data block successfully created.
You want me to create a v09 style flexible-size internal meta data block.
There appears to be a v09 flexible-size internal meta data block
already in place on /dev/drbdpool/.drbdctrl_1 at byte offset 4190208
Do you really want to overwrite the existing meta-data?
*** confirmation forced via --force option ***
Do you want to proceed?
*** confirmation forced via --force option ***
NOT initializing bitmap
md_offset 4190208
al_offset 4157440
bm_offset 4153344
Found some data
==> This might destroy existing data! <==
initializing activity log
Writing meta data...
New drbd meta data block successfully created.
Error: Operation not allowed on satellite node
I can’t find anything on how to resolve this. Any Ideas? I can’t even add the
—force with add-node. seems that is not a valid options with that command.
Jason
> On May 12, 2016, at 6:51 PM, Jason Romo <ja...@securityarsenal.com> wrote:
>
> Hello all new to the group,
>
> DRBD9 was working just fine. I moved servers to the datacenter after a few
> weeks of testing. I loaded two VMs and I thought they had synced. I guess
> they didn’t. The primary is fine. I have since added new images to the
> primary but not being passed. I guess due to the error on the two resources
> in diskless state. The secondary in this state:
>
>
> VE1 is primary
> VE2 is secondary
>
> VE1> says connecting for all resources, but volumes are UpToDate. Guess it
> is due to the errors on the secondary.
>
> VE2> drbdadm status
>
> .drbdctrl role:Secondary
> volume:0 disk:UpToDate
> volume:1 disk:UpToDate
> ve1 role:Primary
> volume:0 peer-disk:UpToDate
> volume:1 peer-disk:UpToDate
>
> vm-102-disk-1 role:Secondary
> disk:Diskless
>
> vm-107-disk-1 role:Secondary
> disk:Diskless
>
>
>
> I tried to disconnect and adjust, disconnect and —force down, up. I just get
> this error:
>
> VE2: adjust
> open(/dev/drbdpool/vm-102-disk-1_00) failed: No such file or directory
> Command 'drbdmeta 100 v09 /dev/drbdpool/vm-102-disk-1_00 internal apply-al'
> terminated with exit code 20
> open(/dev/drbdpool/vm-107-disk-1_00) failed: No such file or directory
> Command 'drbdmeta 101 v09 /dev/drbdpool/vm-107-disk-1_00 internal apply-al'
> terminated with exit code 20
>
>
> VE2: connect all
> .drbdctrl: Failure: (125) Device has a net-config (use disconnect first)
> Command 'drbdsetup connect .drbdctrl 0' terminated with exit code 10
> vm-102-disk-1: Failure: (162) Invalid configuration request
> additional info from kernel:
> unknown connection
> Command 'drbdsetup connect vm-102-disk-1 1' terminated with exit code 10
> vm-107-disk-1: Failure: (162) Invalid configuration request
> additional info from kernel:
> unknown connection
> Command 'drbdsetup connect vm-107-disk-1 1' terminated with exit code 10
>
> I don’t have any resources on the secondary. So If there is a way to just
> have it drop it all and pull from primary again that works. Or how can I
> repair this state so I can get the secondary to pull the other images.
>
> Thanks again for any advice,
> Jason
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> drbd-user mailing list
> drbd-user@lists.linbit.com
> http://lists.linbit.com/mailman/listinfo/drbd-user
_______________________________________________
drbd-user mailing list
drbd-user@lists.linbit.com
http://lists.linbit.com/mailman/listinfo/drbd-user
