I have been getting the same problem. Fresh install from Proxmox 4.2 DRBD9. I get the dreaded DBus error. I can't get the secondary to work at all the DBUS errors on everything using dbus. Been waiting for a resolution for a long time from DRBD9 developers. I think they just gave up. DRBD9 is not ready for use yet. I suggest you move to ceph. I am working on doing that as well. Proxmox decided to rip out the stable DRBD 8.x version to put in 9. I got it working once and after a reboot it never worked again.
So I wouldn't put DRBD9 into anything critical. I even had their DRBD9 staff try to resolve it. Glad I didn't have it in production. --Jason On Jun 7, 2016, 3:10 PM, at 3:10 PM, Michele Rossetti <rosse...@sardi.it> wrote: >Thanks, Roland, > >but it seems impossible to configure with drbdmanage a complete mesh >configuration with 2 interfaces (cross patch) for each node. >Here below the mails with Petra Trunner that confirmed me the manual >config is right. Must I connect the 3 nodes with only 1 interfaces >and the use of switches? >Regards, >Michele > >Subject: Re: DRBD - your request >From: Petra Trunner <petra.trun...@linbit.com> > >Hi Michele, > >yes, that's the right way how you've done it. > >To your last question: not yet, but very soon. > >Did you know? We have a DRBD mailing list >http://lists.linbit.com/mailman/listinfo/drbd-user > >There, you can register and also take a look at the linked archive. > > >Regards, > >Petra > > >Am 17.05.16 um 10:16 schrieb Michele Rossetti: >>Re: DRBD - your request >>Dear Petra, >>thank you for your reply, and I'm sorry to disturb you again, but in >>the userguide you suggested I cannot find how to configure the >>connection as indicated in DRBD9 userguide PDF at point 5.8 for >>complete mash (I have 3 servers each one with 2 NICs dedicated to >>DRBD, connected with cross cables. >> >>Must I modify manually the drbdctrl.res created by DRBDmanage, adding: >> >># mpve1-2 have crossover links like 192.168.65.x >>connection { >>host mpve1 address 192.168.65.135 port 7012; >>host mpve2 address 192.168.65.136 port 7021; >>} >># mpve1-3 have crossover links like 192.168.67.x >>connection { >>host mpve1 address 192.168.67.135 port 7013; >>host mpve3 address 192.168.67.137 port 7031; >>} >># mpve2-3 have crossover links like 192.168.66.x >>connection { >>host mpve2 address 192.168.66.136 port 7023; >>host mpve3 address 192.168.66.137 port 7032; >>} >>or there is a method with DRBDmanage (not clearly specified in the >manual? >> >>Thanks again for your kindness, >>have a nice day, >>Michele >> >>>Dear Michele, >>> >>>I wouldn't create such cluster's config by hand, therefor we created >>>DRBDmanage. Have a look at the setup guide, it makes adding those >nodes >>>to your cluster much easier than it was before: >>>https://www.drbd.org/en/doc/users-guide-90/ch-admin-drbdmanage >>> >>>Kind regards, >>>Petra >>> >>>-- >>>Petra Trunner >>>DRBD - Corosync - Pacemaker >>> >>>Dear Michele, >>> >>>I wouldn't create such cluster's config by hand, therefor we created >>>DRBDmanage. Have a look at the setup guide, it makes adding those >nodes >>>to your cluster much easier than it was before: >>>https://www.drbd.org/en/doc/users-guide-90/ch-admin-drbdmanage >>> >>>Kind regards, >>>Petra >>>-- >Petra Trunner > >At 14:24 +0200 07.06.2016, Roland Kammerer wrote: >>On Tue, Jun 07, 2016 at 01:22:03PM +0200, Michele Rossetti wrote: >>> Hi all, >>> Here below the drbdctrl.res, manually configurated regarding >connections: >> >>No. You are not supposed to touch any resource files drbdmanage >>generates, especially not the one it uses for its cluster database >(aka >>the control volume). These files get overwritten. >> >>nodea:$ drbdmanage init IP_OF_INTERFACE_FOR_CLUSTER_COMMUNICATION >> >>nodea:$ drbdmanage new-node nodeb NODEBIP >>nodea:$ drbdmanage new-node nodec NODECIP >> >>If you want to make life easy, ssh-copy-id nodea's ssh key to nodeb >and >>nodec. >> >>Regards, rck >>_______________________________________________ >>drbd-user mailing list >>drbd-user@lists.linbit.com >>http://lists.linbit.com/mailman/listinfo/drbd-user > > >-- >""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" >MICRO srl >Informatica e Telecomunicazioni - Web services - Web sites > > Michele Rossetti > >sede legale: via Raffa Garzia 7 09126 Cagliari (Italy) >sede operativa: viale Marconi 222 09131 Cagliari >Ph. +39 070 400240 Fax +39 070 4526207 > >MKM-REG >Web: http://www.microsrl.com http://www.sardi.it >E-mail: micro...@microsrl.com >""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" >_______________________________________________ >drbd-user mailing list >drbd-user@lists.linbit.com >http://lists.linbit.com/mailman/listinfo/drbd-user
_______________________________________________ drbd-user mailing list drbd-user@lists.linbit.com http://lists.linbit.com/mailman/listinfo/drbd-user
