On Fri, Feb 03, 2017 at 03:32:39PM +0900, Seiichirou Hiraoka wrote:
> Hello.
>
> I use DRBD in the following environment.
>
> OS: Redhat Enterprise Linux 7.1
> Pacemaker: 1.1.12 (CentOS Repository)
> Corosync: 2.3.4 (CentOS Repository)
> DRBD: 8.4.9 (ELRepo)
> # rpm -qi drbd84-utils
> Name : drbd84-utils
> Version : 8.9.2
> Release : 2.el7.elrepo
> Architecture: x86_64
> Vendor: The ELRepo Project (http://elrepo.org)
> # rpm -qi kmod-drbd84
> Name : kmod-drbd84
> Version : 8.4.9
> Release : 1.el7.elrepo
> Architecture: x86_64
>
> Although DRBD is operated on two servers (server1, server2),
> the following error message suddenly appears
> and writing to the DRBD area can not be performed.
>
> . server1(master)
> Jan 20 10:41:16 server1 kernel: block drbd0: local WRITE IO error sector
> 118616936+40 on dm-0
> Jan 20 10:41:16 server1 kernel: block drbd0: disk( UpToDate -> Failed )
> Jan 20 10:41:16 server1 kernel: block drbd0: Local IO failed in __req_mod.
> Detaching...
> Jan 20 10:41:16 server1 kernel: block drbd0: 0 KB (0 bits) marked out-of-sync
> by on disk bit-map.
> Jan 20 10:41:16 server1 kernel: block drbd0: disk( Failed -> Diskless )
> Jan 20 10:41:16 server1 kernel: block drbd0: Got NegDReply; Sector
> 117512416s, len 4096.
> Jan 20 10:41:16 server1 kernel: drbd0: WRITE SAME failed. Manually zeroing.
That ^^ is the relevant hint.
VMWare "virtual" disks seem to love to pretend to be able to do WRITE SAME,
but when the actually see such requests, fail them with IO error.
(Not blaming VMWare here, maybe other (real/virtual) disks show the same
behavior. It's just the most frequent "offender" currently)
That's not easy for DRBD to handle.
Next DRBD release will have a config switch to turn off write-same
support for specific DRBD volumes.
Meanwhile, available work arounds:
use a different type of virtual disk ("sata" may work), something that
does not claim to support something it then does not handle.
or, *early* in the boot process (before you bring up DRBD),
disable write same like this:
echo 0 | tee /sys/block/*/device/../*/scsi_disk/*/max_write_same_blocks
(for the relevant backend devices)
If you use LVM, you may need to vgchange -an ; vgchange -ay after that,
(at least for the relevant VGs), if they have already been activated.
--
: Lars Ellenberg
: LINBIT | Keeping the Digital World Running
: DRBD -- Heartbeat -- Corosync -- Pacemaker
DRBD® and LINBIT® are registered trademarks of LINBIT
__
please don't Cc me, but send to list -- I'm subscribed
_______________________________________________
drbd-user mailing list
drbd-user@lists.linbit.com
http://lists.linbit.com/mailman/listinfo/drbd-user
