OS version: SLES 12 SP2 + online updates.
drbd version: 9.0.1+git.86e4439-9.2
drbd-kmp-default version: 9.0.1+git.86e4439_k4.4.21_69-9.2
drbd-utils version: 8.9.6-8.3.5
Its a 1 TB volume with XFS file system and both the nodes are connected
via 1 Gbps network. DRBD replication started 41 hours before but it just
reached 8.78 % yet.
drbdsetup status oracle --verbose --statistics
oracle node-id:1 role:Primary suspended:no
write-ordering:flush
volume:0 minor:0 disk:UpToDate
size:1904549052 read:515556707 written:13288947 al-writes:6734
bm-writes:0
upper-pending:0 lower-pending:0 al-suspended:no blocked:no
prdnode2 node-id:0 connection:Connected role:Secondary congested:no
volume:0 replication:SyncSource peer-disk:Inconsistent done:8.78
resync-suspended:no
received:0 sent:176786480 out-of-sync:1737341808 pending:0
unacked:0
Why is replication so slow ? Should I run the following command on
SynTarget:
drbdadm disk-options --c-plan-ahead=0 --resync-rate=110M oracle
and then later on edit the resource file to add the following:
disk { resync-rate 100M; }
Current configuration:
cat global_common.conf
global { usage-count no;}
common {
handlers { fence-peer "/usr/lib/drbd/crm-fence-peer.sh";
after-resync-target "/usr/lib/drbd/crm-unfence-peer.sh"; }
startup { wfc-timeout 0; degr-wfc-timeout 120; }
disk { on-io-error detach; al-extents 3389; }
net { after-sb-0pri discard-zero-changes; after-sb-1pri
discard-secondary; max-buffers 8000;
max-epoch-size 8000; sndbuf-size 0; verify-alg md5;
ping-int 2; ping-timeout 2; connect-int 2;
timeout 5; ko-count 5; }
}
cat oracle.res
resource oracle {
device /dev/drbd_r0 minor 0;
meta-disk internal;
on node1 { disk "/dev/sdb2"; address 10.1.1.1:7780; }
on node2 { disk "/dev/sdb2"; address 10.1.1.2:7780; }
}
--
Regards,
Muhammad Sharfuddin
_______________________________________________
drbd-user mailing list
drbd-user@lists.linbit.com
http://lists.linbit.com/mailman/listinfo/drbd-user
