Hi,
We are experiencing a resync problem with drbd dkms kernel module 9.0.25-1:
# dkms status
> drbd, 9.0.25-1, 4.19.0-12-amd64, x86_64: installed
>
If we do not set any parameters in global_common.conf seems to be ok but
extremely low resync performance noticed (few kbits/s). When we set any
resync parameter (and drbdadm adjust all on both nodes) we can't reach more
than 5/6Mbps in syncing nodes (both with same nvme high speed disks) and
this error message is shown in dmesg:
[ 851.911236] drbd storage/0 drbd1000 cluster1: ASSERTION
> __dec_unacked(peer_device) >= 0 FAILED in e_end_resync_block
> [ 853.771264] drbd storage/0 drbd1000 cluster1: ASSERTION
> __dec_unacked(peer_device) >= 0 FAILED in e_end_resync_block
> [ 855.683292] drbd storage/0 drbd1000 cluster1: ASSERTION
> __dec_unacked(peer_device) >= 0 FAILED in e_end_resync_block
> [ 855.807294] drbd storage/0 drbd1000 cluster1: ASSERTION
> __dec_unacked(peer_device) >= 0 FAILED in e_end_resync_block
>
The net parameters we set in global_common.conf are:
> net {
> protocol C;
>
> allow-two-primaries;
> after-sb-0pri discard-zero-changes;
> after-sb-1pri discard-secondary;
> after-sb-2pri disconnect;
> }
>
And we have MTU 9000 on both nodes.
Any ideas why this is happening?
_______________________________________________
Star us on GITHUB: https://github.com/LINBIT
drbd-user mailing list
drbd-user@lists.linbit.com
https://lists.linbit.com/mailman/listinfo/drbd-user
