I've been having great luck with the recent snapshots, as well as the CVS trunk itself, on my Rev 0 r128 32 meg sdram agp card. Two outstanding questions keep poking me to ask them, so here goes :) 1> About 1-2 months ago Gareth had done the initial branch of ati-5-0-1(?) that had 2d accelerated drawing using the CCE. It was blistering fast, but since the branch had the same problem as the trunk with r128 lockups. This has since been fixed in the trunk, but wasn't initially fixed in the branch. What is the status of getting the CCE acceleration into the trunk? and 2> In my testing of rune for loki, whenever multitextures are enabled, there is flickering on the screen. When multitectures are disabled, it works, but doesn't look as good. Is this a driver or a UT Enginer problem? (so I know where to report the bug :) Thanks, and thanks again for all the hard work and effort it took to get to the point that the drivers are today (rock solid, few complaints :) Thanks! -S Scott Call Router Geek, ATGi, home of $6.95 Prime Rib "Only the Phoenix rises and does not descend And everything changes. And nothing is truly lost." - Neil Gaiman, The Wake _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] http://lists.sourceforge.net/lists/listinfo/dri-devel
