On 2002.05.01 23:11 Peter Andersson wrote: > Leif Delgass wrote: > >> On Wed, 1 May 2002, Peter Andersson wrote: >> >>> I have compiled the new kernel drivers and get the following error >>> when trying to run glxgears: >>> >>> Error flushing vertex buffer: return = -16 >>> >>> Peter >>> >> >> That means the engine is locking up. Either wait_for_idle fails (DMA) >> or wait_for_fifo fails (MMIO). Is MACH64_USE_DMA set to 0 or 1? Is >> this >> with the MMIO patch applied? >> > I have applied the patch supplied by you, (mach64-endian-mmio-3.diff). > And MACH_USE_DMA is set to 1. > > Peter >
Well, it should work on both cases, but the patch was meant to test with MACH_USE_DMA set to 0. Again, it should work with set as 1 (otherwise means a regression), but we wanted that it also worked with set as 0. Leif, if this doesn't work, I think that we should commit the mach64-endian-mmio-3.diff patch (since it's the "Right Thing" anyway), and have Peter do a "cvs update -C" to be sure everything is in sync (and set USE_DMA to 0 afterwards too). (I'm going to bed now so I won't be able to do this until tomorrow). José Fonseca _______________________________________________________________ Have big pipes? SourceForge.net is looking for download mirrors. We supply the hardware. You get the recognition. Email Us: [EMAIL PROTECTED] _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
