On June 26, 2002 02:29 am, Nicolas Aspert wrote: > Slava Polyakov wrote: > > 2.4.19-pre10: > > > > version: 0.99 > > bridge id: 0x11308086 > > agp_mode: 0x1f000207 > > aper_base: 0xd8000000 > > aper_size: 64 > > pg_total: 82176 > > pg_system: 82176 > > pg_used: 0 > > entry.key : 0 > > entry.key : 1 > > Allocated 8 megs of GART memory > > MemoryBenchmark: 521 mb/s > > MemoryBenchmark: 606 mb/s > > MemoryBenchmark: 606 mb/s > > Average speed: 577 mb/s > > Testing data integrity (1st pass): passed on first pass. > > Testing data integrity (2nd pass): passed on second pass. > > That's OK. > > > 2.4.19-rc1 > > open: no such device > > > > apprently i815 agp support got broken in 2.4.19-rc1. > > Yep, looks like something went wrong. I don't see any blatant error at > the moment... > Do you see something strange in your logs when doing a 'modprobe > agpgart' ? And maybe also send the output of 'lspci -nv', just to be sure > > a+
Nope... dmesg shows all the same with both kernels: [drm] AGP 0.99 on Intel i815 @ 0xd8000000 64MB [drm] Initialized radeon 1.3.0 20020521 on minor 0 and here is the lspci: 00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04) Subsystem: ABIT Computer Corp.: Unknown device 0407 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M] Capabilities: <available only to root> 00:01.0 PCI bridge: Intel Corp.: Unknown device 1131 (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: dc000000-ddffffff Prefetchable memory behind bridge: d0000000-d7ffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- 00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 11) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000a000-0000bfff Memory behind bridge: de000000-dfffffff Prefetchable memory behind bridge: e0000000-e00fffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corp. 82820 820 (Camino 2) Chipset ISA Bridge (ICH2) (rev 11) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:1f.1 IDE interface: Intel Corp. 82820 820 (Camino 2) Chipset IDE U100 (rev 11) (prog-if 80 [Master]) Subsystem: ABIT Computer Corp.: Unknown device 0407 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 4: I/O ports at f000 [size=16] 00:1f.2 USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub A) (rev 11) (prog-if 00 [UHCI]) Subsystem: ABIT Computer Corp.: Unknown device 0407 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at d000 [size=32] 00:1f.3 SMBus: Intel Corp. 82820 820 (Camino 2) Chipset SMBus (rev 11) Subsystem: ABIT Computer Corp.: Unknown device 0407 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 3 Region 4: I/O ports at 5000 [size=16] 00:1f.4 USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub B) (rev 11) (prog-if 00 [UHCI]) Subsystem: ABIT Computer Corp.: Unknown device 0407 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 11 Region 4: I/O ports at d400 [size=32] 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon QD (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc: Unknown device 008a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min), cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at c000 [size=256] Region 2: Memory at dd000000 (32-bit, non-prefetchable) [size=512K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: <available only to root> 02:01.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02) Subsystem: Ensoniq: Unknown device 2003 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- Latency: 32 (3000ns min, 32000ns max) Interrupt: pin A routed to IRQ 3 Region 0: I/O ports at a000 [size=64] Capabilities: <available only to root> 02:02.0 Ethernet controller: Digital Equipment Corporation DECchip 21041 [Tulip Pass 3] (rev 21) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 3 Region 0: I/O ports at a400 [size=128] Region 1: Memory at df000000 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=256K] 02:03.0 Ethernet controller: 3Com Corporation 3c900B-TPO [Etherlink XL TPO] (rev 04) Subsystem: 3Com Corporation 3C900B-TPO Etherlink XL TPO 10Mb Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2500ns min, 12000ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at a800 [size=128] Region 1: Memory at df001000 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: <available only to root> 02:04.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02) Subsystem: ATI Technologies Inc: Unknown device 0001 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=4K] 02:04.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02) Subsystem: ATI Technologies Inc: Unknown device 0001 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0001000 (32-bit, prefetchable) [size=4K] ------------------------------------------------------- This sf.net email is sponsored by: Jabber Inc. Don't miss the IM event of the season | Special offer for OSDN members! JabConf 2002, Aug. 20-22, Keystone, CO http://www.jabberconf.com/osdn _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel