On Mon, 2002-07-08 at 18:36, David Willmore wrote: > Log bits: > (--) PCI:*(1:0:0) S3 ViRGE/MX rev 6, Mem @ 0x40000000/26 > (II) LoadModule: "s3virge" > (II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o > (II) Module s3virge: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 2.0.0 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.5 > (II) S3VIRGE: driver (version 2.0.0) for S3 ViRGE chipsets: virge, 86C325, > virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2, > 86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365, > trio 3d/2x, 86C362, 86C368 > (II) Primary Device is: PCI 01:00:0 > (--) Assigning device section with no busID to primary device > (--) Chipset virge mx found > (**) S3VIRGE(0): Depth 16, (--) framebuffer bpp 16 > (==) S3VIRGE(0): RGB weight 565 > (==) S3VIRGE(0): Default visual is TrueColor > (==) S3VIRGE(0): Using HW Cursor > (==) S3VIRGE(0): Using fb. > (==) S3VIRGE(0): mx_cr3a_fix. > (==) S3VIRGE(0): XVideo allowed (depends on chipset). > (II) S3VIRGE(0): initializing int10 > (II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000 > (II) S3VIRGE(0): VESA BIOS detected > (II) S3VIRGE(0): VESA VBE Version 2.0 > (II) S3VIRGE(0): VESA VBE Total Mem: 4096 kB > (II) S3VIRGE(0): VESA VBE OEM: S3 Incorporated. M5 BIOS > (II) S3VIRGE(0): VESA VBE OEM Software Rev: 1.0 > (II) S3VIRGE(0): VESA VBE OEM Vendor: S3 Incorporated. > (II) S3VIRGE(0): VESA VBE OEM Product: VBE 2.0 > (II) S3VIRGE(0): VESA VBE OEM Product Rev: Rev 1.1 > (--) S3VIRGE(0): Chipset: "virge mx" > (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (II) S3VIRGE(0): I2C bus "I2C bus" initialized. > (II) S3VIRGE(0): I2C device "I2C bus:ddc2" registered. > (II) S3VIRGE(0): I2C device "I2C bus:ddc2" removed. > (==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0) > (--) S3VIRGE(0): videoram: 4096k > (--) S3VIRGE(0): COMPAQ M5 BIOS found > (--) S3VIRGE(0): assuming RefCLK value of 14.318 MHz > (--) S3VIRGE(0): Detected current MCLK value of 100.227 MHz > (--) S3VIRGE(0): LCD size 1024x768, clock 65.028 MHz > (II) S3VIRGE(0): Monitor0: Using hsync range of 31.50-48.50 kHz > (II) S3VIRGE(0): Monitor0: Using vrefresh range of 40.00-70.00 Hz > (II) S3VIRGE(0): Clock range: 20.00 to 270.00 MHz > (--) S3VIRGE(0): Virtual size is 1024x768 (pitch 1024) > (**) S3VIRGE(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz > (II) S3VIRGE(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 >-hsync -vsync > (==) S3VIRGE(0): DPI set to (75, 75) > (II) S3VIRGE(0): *** using default video mem config > (II) S3VIRGE(0): ps3v->videoRambytes =4194304 > (II) S3VIRGE(0): ps3v->bufferSize = 960000 > (II) S3VIRGE(0): ps3v->texSize = 655360 > (II) S3VIRGE(0): Reserved back buffer at offset 0x18c000 > (II) S3VIRGE(0): Reserved depth buffer at offset 0x276000 > (II) S3VIRGE(0): Reserved 640 kb for textures at offset 0x360000 > (II) S3VIRGE(0): Reserved hw cursor at offset 0x3ffc00 > (==) S3VIRGE(0): Write-combining range (0x40000000,0x400000) > (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (II) S3VIRGE(0): CheckSymbol: GlxSetVisualConfigs OK > (II) S3VIRGE(0): CheckSymbol: DRIScreenInit OK > (II) S3VIRGE(0): CheckSymbol: drmAvailable OK > drmOpenDevice: minor is 0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 7, (OK) > drmOpenDevice: minor is 0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 7, (OK) > drmOpenDevice: minor is 0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 7, (OK) > drmGetBusid returned '' > (II) S3VIRGE(0): [drm] created "s3v" driver at busid "PCI:1:0:0" > (II) S3VIRGE(0): [drm] added 8192 byte SAREA at 0xcc8b1000 > (II) S3VIRGE(0): [drm] mapped SAREA 0xcc8b1000 to 0x4001c000 > (II) S3VIRGE(0): [drm] framebuffer handle = 0x40000000 > (II) S3VIRGE(0): [drm] added 1 reserved context for kernel > (II) S3VIRGE(0): Going to S3VDRIMapInit > (II) S3VIRGE(0): [drm] Registers = 0x41000000 > (II) S3VIRGE(0): *** bufs(0) = 16 > (II) S3VIRGE(0): *** bufs(1) = 1 > (II) S3VIRGE(0): [drm] buffers mapped with 0x8579058 > (II) S3VIRGE(0): [drm] 17 DMA buffers mapped > (II) S3VIRGE(0): Coming from S3VDRIMapInit > (II) S3VIRGE(0): Going to S3VDRIPciInit > (II) S3VIRGE(0): Coming from S3VDRIPciInit > (II) S3VIRGE(0): Going to S3VInitVisualConfigs > (II) S3VIRGE(0): Coming from S3VInitVisualConfigs > (II) S3VIRGE(0): [dri] Visual configs initialized > (**) S3VIRGE(0): Using FB > (II) S3VIRGE(0): ps3v->videoRamKbytes = 4096 > (II) S3VIRGE(0): Memory manager: ps3v->backOffset = 1622016; width_bytes = >2048;scanlines = 2047 > (II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > CPU to Screen color expansion > Solid Horizontal and Vertical Lines > Image Writes > Offscreen Pixmaps > Setting up tile and stipple cache: > 32 128x128 slots > 10 256x256 slots > (==) S3VIRGE(0): Backing store disabled > (==) S3VIRGE(0): Silken mouse enabled > (**) Option "dpms" > (**) S3VIRGE(0): DPMS enabled > (II) S3VIRGE(0): Using overlay video > (II) S3VIRGE(0): X context handle = 0x00000001 > (II) S3VIRGE(0): [drm] installed DRM signal handler > (II) S3VIRGE(0): [DRI] installation complete > (II) S3VIRGE(0): [drm] info.mmio_offset = 41000000 > (II) S3VIRGE(0): [drm] info.buffers_offset = 0 > (II) S3VIRGE(0): [drm] S3V Dma Initialized > (==) S3VIRGE(0): Direct rendering enabled > > Ehm. Are you disabling 2D accel in XF86Config (see the readme about it)?
Vale, - max ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Stuff, things, and much much more. http://thinkgeek.com/sf _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
