Ok the patch is atttached, you have what we call a "Mach64 LB" or PCI_CHIP_MACH64LB. In order to use this patch you'l need to build from source.
--- Shan Mignot <[EMAIL PROTECTED]> wrote: > Hi, > > I've recently downloaded the dri package > (mach64-20020705-linux.i386.tar.bz2) for the mach64 chipset and tried > to set things up. Here is what lspci reports about my graphic card: > > 01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro > AGP-133 (rev dc) (prog-if 00 [VGA]) > Subsystem: CLEVO/KAPOK Computer: Unknown device 0280 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping+ SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 8 min, 66 set, cache line size 08 > Region 0: Memory at fd000000 (32-bit, non-prefetchable) > [size=16M] > Region 1: I/O ports at 2000 [size=256] > Region 2: Memory at fc100000 (32-bit, non-prefetchable) > [size=4K] > Expansion ROM at <unassigned> [disabled] [size=128K] > Capabilities: <available only to root> > > Although XFree86 detects 8 Mo of video memory, it does not use of the > it and hence the buffer allocation fails and xdm refuses to start my > window manager. Here is what I think is relevant from my XFree86.0.log > file: > > (II) ATI: Candidate "Device" section "ATI 3D LT PRO". > (II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 detected. > (II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 assigned to active > "Device" section "ATI 3D LT PRO". > (II) ATI(0): VESA BIOS detected > (II) ATI(0): VESA VBE Version 2.0 > (II) ATI(0): VESA VBE Total Mem: 8128 kB > (II) ATI(0): VESA VBE OEM: ATI MACH64 > (II) ATI(0): VESA VBE OEM Software Rev: 1.0 > (II) ATI(0): VESA VBE OEM Vendor: ATI Technologies Inc. > (II) ATI(0): VESA VBE OEM Product: MACH64LP > (II) ATI(0): VESA VBE OEM Product Rev: 01.00 > (II) ATI(0): VESA VBE DDC supported > (II) ATI(0): VESA VBE DDC Level none > (II) ATI(0): VESA VBE DDC transfer in appr. 2 sec. > (II) ATI(0): VESA VBE DDC read failed > (--) ATI(0): ATI 3D Rage LT Pro graphics controller detected. > (--) ATI(0): Chip type 4C42 "LB", version 4, foundry UMC, class 0, > revision 0x03. > (--) ATI(0): AGP bus interface detected; block I/O base is 0x2000. > (--) ATI(0): ATI Mach64 adapter detected. > (!!) ATI(0): For information on using the multimedia capabilities > of this adapter, please see http://gatos.sf.net. > (--) ATI(0): Internal RAMDAC (subtype 1) detected. > (==) ATI(0): RGB weight 888 > (==) ATI(0): Default visual is TrueColor > (==) ATI(0): Using gamma correction (1.0, 1.0, 1.0) > (II) ATI(0): Using Mach64 accelerator CRTC. > (--) ATI(0): 1024x768 panel (ID 2) detected. > (--) ATI(0): Panel model LG LP150X1. > (--) ATI(0): Panel clock is 65.146 MHz. > (II) ATI(0): Using digital flat panel interface. > (II) ATI(0): Storing hardware cursor image at 0xFD7FFC00. > (II) ATI(0): Using 8 MB linear aperture at 0xFD000000. > (!!) ATI(0): Virtual resolutions will be limited to 8191 kB > due to linear aperture size and/or placement of hardware cursor image > area. > (II) ATI(0): Using Block 0 MMIO aperture at 0xFC100400. > (II) ATI(0): Using Block 1 MMIO aperture at 0xFC100000. > (==) ATI(0): Write-combining range (0xfd000000,0x800000) > (II) ATI(0): MMIO write caching enabled. > (--) ATI(0): 8192 kB of SGRAM (1:1) detected (using 8191 kB). > (WW) ATI(0): Cannot shadow an accelerated frame buffer. > (--) ATI(0): Internal programmable clock generator detected. > (--) ATI(0): Reference clock 29.500 MHz. > (WW) ATI(0): DRI static buffer allocation failed -- need at least 8192 > kB video memory > (II) ATI(0): Largest offscreen areas (with overlaps): > (II) ATI(0): 1024 x 1279 rectangle at 0,768 > (II) ATI(0): 768 x 1280 rectangle at 0,768 > (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > Indirect CPU to Screen color expansion > Solid Lines > Offscreen Pixmaps > Setting up tile and stipple cache: > 32 128x128 slots > 10 256x256 slots > > (==) ATI(0): Backing store disabled > (==) ATI(0): Silken mouse enabled > (**) Option "dpms" > (**) ATI(0): DPMS enabled > (II) ATI(0): Direct rendering disabled > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension LBX > (II) Initializing built-in extension XC-APPGROUP > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFree86-Bigfont > (II) Initializing built-in extension RENDER > (II) Keyboard "Generic Keyboard" handled by legacy driver > (**) Option "Protocol" "PS/2" > (**) Configured Mouse: Protocol: "PS/2" > (**) Option "CorePointer" > (**) Configured Mouse: Core Pointer > (**) Option "Device" "/dev/psaux" > (==) Configured Mouse: Buttons: 3 > (**) Option "Emulate3Buttons" "true" > (**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 > (**) Option "ZAxisMapping" "4 5" > (**) Configured Mouse: ZAxisMapping: buttons 4 and 5 > (II) XINPUT: Adding extended input device "Configured Mouse" (type: > MOUSE) > AUDIT: Thu Jul 11 16:00:59 2002: 245 X: client 2 rejected from local > host > Auth name: XDM-AUTHORIZATION-1 ID: -1 > AUDIT: Thu Jul 11 16:00:59 2002: 245 X: client 3 rejected from local > host > Auth name: XDM-AUTHORIZATION-1 ID: -1 > > And here is the content of my /etc/X11/XF86-Config-4 file: > > Section "Files" > FontPath "unix/:7100" # local font > server > # if the local font server has problems, we can fall back on > these > FontPath "/usr/lib/X11/fonts/misc" > FontPath "/usr/lib/X11/fonts/cyrillic" > FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/Type1" > FontPath "/usr/lib/X11/fonts/Speedo" > FontPath "/usr/lib/X11/fonts/100dpi" > FontPath "/usr/lib/X11/fonts/75dpi" > EndSection > > Section "Module" > Load "GLcore" > Load "bitmap" > Load "dbe" > Load "ddc" > Load "dri" > Load "extmod" > Load "freetype" > Load "glx" > Load "int10" > Load "pex5" > Load "record" > Load "speedo" > Load "type1" > Load "vbe" > Load "xie" > EndSection > > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "keyboard" > Option "CoreKeyboard" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc101" > Option "XkbLayout" "us" > EndSection > > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device" "/dev/psaux" > Option "Protocol" "PS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Device" > Identifier "ATI 3D LT PRO" > Driver "ati" > VendorName "ATI" > BoardName "MACH64 LB" > Chipset "ati" > ChipId 0x4c42 > ChipRev 0xdc > BusId "PCI:1:0:0" > VideoRam 8192 > EndSection > > Section "Monitor" > Identifier "Generic Monitor" > Option "DPMS" > VendorName "Monitor Vendor" > ModelName "Monitor Model" > EndSection > > Section "Screen" > Identifier "Default Screen" > Device "ATI 3D LT PRO" > Monitor "Generic Monitor" > DefaultDepth 24 > SubSection "Display" > Depth 1 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 4 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 8 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 15 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 16 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 24 > Modes "1024x768" "800x600" "640x480" > EndSubSection > EndSection > > Section "ServerLayout" > Identifier "Default Layout" > Screen "Default Screen" > InputDevice "Generic Keyboard" > InputDevice "Configured Mouse" > EndSection > > I would really appreciate if anyone could give me a clue of what is > really the problem and what needs to be fixed. > > Thanks, > > Shan > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > PC Mods, Computing goodies, cases & more > http://thinkgeek.com/sf > _______________________________________________ > Dri-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/dri-users __________________________________________________ Do You Yahoo!? Sign up for SBC Yahoo! Dial - First Month Free http://sbc.yahoo.com
mach64LB.patch
Description: mach64LB.patch
