I recently installed Xfree86 4.2.1, and had a little trouble with the screen
not displaying anything that looked very much like x windows.
There was a problem with my setup, and I had to add the option
option "LCDSync"
to the devices section of my XF86Config
This solved my problem, and I was happily using X, until I decided that I
wanted to add DRI support.
Now I have the same problem again, (e.g the screen displays the same sort of
crap when I load X)
but the LCDSync option seems to have no effect.
any Ideas why?
Thanks
Giles
Here is my XF86Config:
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "AlwaysCore"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/TTF"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
EndSection
Section "Module"
Load "freetype"
Load "extmod"
Load "glx"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc104"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/misc/psaux"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "accel" # [<bool>]
#Option "crt_screen" # [<bool>]
#Option "composite_sync" # [<bool>]
#Option "linear" # [<bool>]
#Option "mmio_cache" # [<bool>]
#Option "probe_clocks" # [<bool>]
#Option "reference_clock" # <freq>
#Option "shadow_fb" # [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI"
BoardName "Mach64 LM"
ChipSet "ati"
ChipId 0x4c4d
ChipRev 0x64
Option "LCDSync"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Dri-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/dri-devel
