Maybe the printed strings in your patch should mention the "SE" so that no one gets confused.
Anything else looks smooth to me right now. -Alex. > -----Original Message----- > From: Michel Dänzer [mailto:[EMAIL PROTECTED] > Sent: Saturday, September 13, 2003 22:08 > To: #NGUYEN THANH NAM# > Cc: [EMAIL PROTECTED] > Subject: Re: [Dri-devel] ATI Radeon 9200 SE > > > On Sat, 2003-09-13 at 17:13, #NGUYEN THANH NAM# wrote: > > > > I bought a Creative 3D Blaster 5 RX9200 SE (uses ATI Radeon > 9200 SE chip). When I did a lspci the revision shown was > 0x5964 (and there was another one too, I guess it is for > secondary display). However, the radeon driver only supports > 0x5960 to 0x5963 (I checked against the latest radeon-pci.h) > > > > #define PCI_CHIP_RV280_5960 0x5960 > > #define PCI_CHIP_RV280_5961 0x5961 > > #define PCI_CHIP_RV280_5962 0x5962 > > #define PCI_CHIP_RV280_5963 0x5963 > > > > So I was just wondering whether another line like this > > > > #define PCI_CHIP_RV280_5964 0x5964 > > > > would make it work for me. > > You also need to add it some other places, try this patch. > > > -- > Earthling Michel Dänzer \ Debian (powerpc), XFree86 and > DRI developer > Software libre enthusiast \ http://svcs.affero.net/rm.php?r=daenzer ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel