Am 2004.10.12 18:38:18 +0200 schrieb(en) Ian Romanick:
> Andreas Stenglein wrote:
>
> > It might be unrelated (and just some other silly mistake/problem):
> > Using my local version of radeon (r100) driver converted to "t_vertex"
> > I discovered a similar problem recently.
> > 1) running glxgears I get the "hang with only mousepointer moving" -> reboot
> > needed.
>
> I get the hang, but I can ssh in and kill gears. Did you see these
> problems on x86 or PowerPC?
Its on x86 / Athlon XP with Radeon 7500, gcc 2.95.3
(I added some brackets{} in the dma-templates so it compiles)
I can ssh in and kill it, but its not possible to "revive" the box, I have to switch
off.
It might work with the soft-reset trick used for debugging r300.
> > 2) setting tcl_mode=0 and running glxgears -> instant reboot
> > 3) other software seems to work fine, for example q3 or the projtex test.
> > 4) running glxgears with the "original" driver from mesa-cvs works.
>
> I got the same hang with progs/demos/readpix. I tested with gears to
> make sure my changes weren't causing the problem.
Im going to try it (later)...
best regards,
Andreas
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
--
_______________________________________________
Dri-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/dri-devel
