On Mon, Oct 18, 2004 at 01:32:22 -0400, Vladimir Dergachev wrote: > >>>Just to be sure: will the microcode only be loaded if the device will > >>>be used, e.g. by the X.org driver? Until now I just load the module and > >> > >>Yes. In fact DRM driver needs Xserver to tell it which microcode to load. > > > >OK, now I got it: > > > >agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode > >[drm] Loading R300 Microcode > > > >I grabbed the Mesa source, applied the mesa.patch, compiled the > >r300_dri.so driver and copied it to the X.org dri drivers directory, > >but strace glxinfo shows that only the r200_dri.so driver will be used. > > > >What I am missing? > > You need the patch for the 2d driver - it is on the front page. > Try ati.patch.4.
Thanks again. Looks like I used the wrong 2d driver patch before (xorg680.atipatch.r300). Now the glxinfo output looks right: OpenGL renderer string: Mesa DRI R300 20040924 AGP 4x NO-TCL However, glxgears only prints out this messages and exits: disabling 3D acceleration drmCommandWrite: -22 Regards, Tino ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl -- _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
