On Tue, 19 Oct 2004 03:12:36 +0200, Roland Scheidegger <[EMAIL PROTECTED]> wrote: > Vladimir Dergachev wrote: > > On Tue, 19 Oct 2004, Roland Scheidegger wrote: > >> Jon Smirl wrote: > >>> Does the new radeonfb driver in the kernel load? It uses the same I2C > >>> initialization code. > >> > >> excuse my ignorance, but where would I get that new radeonfb driver? > > > > Try latest 2.6.x kernel. You might need to apply the rc4 patch. > > > > There is an option in the driver to enable DDC/i2c. > ah ok. I was just confused with "old" vs. "new" radeonfb. The one in > kernel 2.6.8 has that DDC/i2c option already (and it doesn't load, but > due to another reason). I'll update to 2.6.9 anyway, it is already released.
Try running Ben's radeonfb and see if it fails too. It should since the i2c code is identical. Next I would remove all i2c modules except i2c_core and i2c_algo_bit and see if it will load. Another posibility is that the monid port on your card is just broken, but you never noticed since you don't have a monitor plugged in that needs it. -- Jon Smirl [EMAIL PROTECTED] ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl -- _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
